Jabra Noise Guide User Manual page 8

8
Please ensure that the cable comes out where
there is a hole in the disc base so the cable is not pinched.
R E T U R N T O " TA B L E O F C O N T E N T S "
A
If the exstension tube is needed,
pull the cable through tube B.
Assemble tube A and B. Screw tube AB onto the base disc
and connect the Jabra Noise Guide to the power cable.
Screw the Jabra Noise Guide onto the tube. Mout to a flat
surface as shown below.
B
MOUNTING –
Insert the micro USB pin and pull the
cable through tube A.
B
A
J A B R A N O I S E G U I D E – M A N U A L
ALUMINUM TABLE STAND