1. Manuals
  2. Brands
  3. Jivi Manuals
  4. GPS
  5. JV200
  6. User manual

Jivi JV200 User Manual

Vehicle
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Vehicle GPS Tracker JV200

User Manual

Version: J160111

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JV200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jivi JV200

  • Page 1: User Manual

    Vehicle GPS Tracker JV200 User Manual Version: J160111...
  • Page 2 Choose a rate plan wisely: Your JV200 can use up Internet bandwidth really quickly. Before you use your JV200, we strongly recommend that you talk to your mobile operator about data rates. If you’re on a standard data plan, the costs...
  • Page 3 Popular Uses: map. need. browser. location data. history.
  • Page 4 Introducing your JV200 1. Inside the Box Check your product box for the following items: Charging Cable User Manual 2. JV200 Overview GSM indicator (green) GPS indicator (blue) Power indicator (red)

  • Page 5: Led Indicators

    LED Indicators Power indicator (red) Indication Flashing Power on Solid red Not working properly Power off GPS indicator (blue) Indication Quick Flashing (0.1s on, 0.1s off) Searching GPS signal Solid blue GSM indicator (green) Indication Flashing (0.1s on, 2s off) GSM signal received Solid green No GSM signal...
  • Page 6 86.6(L) x 44(W) x 13.6(H) mm Weight Operation Temperature Operation Voltage Humidity GSM Frequencies Class 12 GPS Sensitivity Cold Start: TTFF (Open Sky) TCP, SMS...

  • Page 7: Getting Started

    4. Getting Started To remove the back cover: Firmly hold the device with both hands and the front panel facing down. Push the back cover up with your thumbs until it disengages from the device and then slide it up to remove. OPEN 4.1 Install SIM card 1.
  • Page 8 Make sure there is enough credit on the SIM card. If you will be using the 4.2 Charge the device (Covert installation) Plug the device connector into a charging cable. Improperly connecting the charging cable can cause serious damage to the 4.3 Install the device You need to choose somewhere that it won't be found, because the whole point of please make sure the receiving side face is up ;...
  • Page 9 device. It’s simply due to the shielding effects of the metal compound of the case. Installation please refers to below picture. Under rear windshield the front windshield; Under front windshield material face), make sure the device does not get wet; metal), make sure the device does not get wet;...

  • Page 10: Device Wiring

    Device Wiring negative. 2. Connect the black wire to ground. 3. Wiring diagram Storage battery Black Orange Ignition Yellow Pump...

  • Page 11: Quick Operation Instructions

    4.5 Power/ACC/Tele-cut off(petrol/electricity) control cable (4 pin) negative please should be independently grounded, do not connect with other ground wire. 5. Quick Operation Instructions To properly use the device, common parameters should be set before initial use. This can be done by using the parameter editor or by sending SMS commands to the device.
  • Page 12 5.1 Add SOS number SMS command to the device to add the SOS number. It will reply “OK! after set successfully. 5.2 APN setting To connect default platform www.tracksolid.com, please send the SMS command Example: 5.3 Server setting To connect other platform, please send the SMS commands below:...
  • Page 13 Command format: Example: It will reply “OK” after set successfully. 5.4 Set the center number to the device. You can set your own mobile number as center number. The command for setting center number is: For example: If set successfully, there is an “OK” reply message. Only the SOS number can be used to add or delete center number successfully.
  • Page 14 upload, default is 10; upload, default is 10; 5.6 Vibration alarm delay time setting few times, it will activate the vibration alarm system. If the vehicle battery is still SMS format: The time ranges from 1 to 60 minutes, default is 10. 1.
  • Page 15 You can check the parameter setting by command: Information replied: used for alarm and monitoring; The replied information contains IMEI number, GPS data uploading Interval, GPS working time, SOS number, center number, sensor time interval, vibration alarm 5.8 Check GPRS parameters SMS command format:...
  • Page 16 6. Operation of device 6.1 Power on/ Power off Power on: Once insert a valid SIM card and connect all the wires, turn on the been located and it starts to work. Power off: Just turn off the power switch. The device will begin to upload positioning data to server once inserting a valid every 10 seconds.
  • Page 17 6.2 Check location 1. Via SMS location message automatically. You can get the coordinates. If the device does not search any information of location, it will send “No data” to the cell phone. Example: Current position! Google Map link. If the device does not search any information of location, it will send “No data”...
  • Page 18 case, the device will send related SMS to the SOS numbers and dial the numbers Cut Power 6.4 Low battery alarm When the device is only working with battery, once the internal voltage of battery alarm on platform. charge.” Which means the battery is too low, inform user charging it in time. 6.5 Vibration alarm The vibration alarm function is off by default.
  • Page 19 The alarm will be sent to both the service platform and SOS numbers. will activate security alarm. When the security alarm is on, once the vehicle vibrates for several times, the OFF), device will activate vibration alarm. The device will then send an alarm message to the platform, also another SMS vibration alarm message to the preset SOS number.
  • Page 20 6.6 Oil cut-off 1. via platform tracker can only indicate to cut off oil when GPS is in valid position status, and when sending oil cut off command. 2. Via SMS Only center number can send the command to the device to cut off and restore oil. to carry out.
  • Page 21 oil supplying, and vehicle will work normally again. Platform account password is needed when sending oil cut off command. 2. Via SMS Only center number can send the command to the device to restore oil. 6.8 Over Speed Alarm When the car is moving over a limited speed in average in a limited time period, then the device will send over speed alarm SMS to user.
  • Page 22 6.9 Restore to factory setting Once received “OK”, it succeeds. 6.10 Reboot device you can send a command to the device to reboot the device. 7. Register and log onto GPS tracking platform: www.tracksolid.com or another designated platform by autohrized dealers. 8.

  • Page 23: Safety Precautions

    before contacting a service professional. Problems Causes Solutions not work when The fuse blows power connected Check SIM card installation Wrong installation of SIM card Filth on the SIM card iron surface. Clean it Useless SIM Contact internet service provider Fail to connect Check installation of device network...
  • Page 24 Never place batteries or devices on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explore when overheated. pressure, which can lead to an internal short circuit and overheating. Correct disposal of this product (Waste Electrical & Electronic Equipment) collection systems) This marking in the battery, manual or packaging indicates that batteries on this product should not be disposed of with other household waste at the end of their...

Table of Contents