Gigabyte M1022 User Manual page 40

2. In Safely Remove Hardware, in the list of devices, select the device that you want to
unplug or eject, and then click Stop. This tells the system that you will be unplugging or
ejecting the device.
3. In Stop a Hardware device, click OK.
A notification appears stating that it is now safe to unplug or eject the device.
Caution
Unplugging or ejecting a device that supports safe removal without first using the Safe
Removal application to warn the system can cause data to be lost or your system to become
unstable. For example, if you use Safe Removal, however, you can warn the system before
you unplug or eject a device, preventing possible loss of data.
Note
For removable storage devices that can safely be removed while the system is on, the system
disables write caching by default. It does this so the devices can be removed without loss of
data. When write caching is disabled, however, the system will likely experience slower
performance, so be sure to enable write caching when you have finished removing the device.
Q: Does M1022 provide a hardware switch or function button to enable/disable the Bluetooth
function?
A: M1022 provides a combined function button to enable/disable the 3G (Fn+F10) and
Bluetooth (Fn+F11) functions.
Q: What are the considerations for the use of the touch control screen?
A: In accordance with the principle of panel structure, the surroundings of the touch control
panel are highly sensitive. Hence, drawing lines along the surroundings of the chassis is
strictly prohibited as this may damage the Pet/film due to extreme pressure or cause the
internal liners/pads on the edges of the outer shell to displace, therefore squeezing the edges
of the touch control screen and causing the screen to
Q: What is the capacity of SDHC card that M1022 can support?
A: The specification of SDHC that M1022 SD card reader supports shall be in accordance with
that of the SD Association. Currently, the maximum capacity announced by SD Association is
32GB
http://www.sdcard.org/developers/tech/sdhc/
Q: How can M1022 be upgraded in the DOS and Windows mode?
A: Please refer to how to upgrade M1022 in the DOS and Windows mode?
Q. Can M1022 change the 2.5-inch SATA interface SSD and install it for use with Windows
XP itself?
A. Currently the M1022 series delivered by Gigabyte does not support SATA
SSD. In case of any version update in the future, the specification will be
announced on the website of Gigabyte.
Q . What is the function of the Installed O/S option in the BIOS menu?
fail.