AltoShaam AR-7E Installation, Operation And Maintenance Manual

Electric rotisserie with ventless hood

Hide thumbs

Table of Contents

Quick Links

Download this manual

R o t i s s e r i e

E l e c t r i c

Models:

ROTISSERIE WITH

AR-7E

VENTLESS HOOD

AR-7VH

• INSTALLATION

• OPERATION

• MAINTENANCE

W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA

PHONE: 262.251.3800 • 800.558.8744

FAX: 262.251.7067 • 800.329.8744

USA

CANADA

ONLY

www.alto-shaam.com

P R I N T E D I N U

M N - 2 8 9 0 7 • 0 2 / 0 9

Table of Contents

Need help?

Do you have a question about the AR-7E and is the answer not in the manual?

Questions and answers

Summary of Contents for AltoShaam AR-7E

Page 1 R o t i s s e r i e ® E l e c t r i c Models: ROTISSERIE WITH AR-7E VENTLESS HOOD AR-7VH • INSTALLATION • OPERATION • MAINTENANCE W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: 262.251.3800 •...
Page 2 ® D E L I V E R Y U N P C K I N G 1. Carefully remove the This Alto-Shaam appliance has been appliance from the thoroughly tested and inspected to insure only the carton or crate. highest quality unit is provided.
Page 3: Safety Procedures And Precautions
SAFETY PROCEDURES AND PRECAUTIONS Knowledge of proper procedures is essential to the 1. This appliance is intended to cook, hold or safe operation of electrically and/or gas energized process foods for the purpose of human equipment. In accordance with generally accepted consumption.
Page 4 I N S TA L L AT I O N N G E R U T I O N IMPROPER INSTALLATION, METAL PARTS OF THIS EQUIPMENT ALTERATION, ADJUSTMENT, BECOME EXTREMELY HOT WHEN IN SERVICE, OR MAINTENANCE COULD OPERATION. TO AVOID BURNS, RESULT IN SEVERE INJURY, DEATH ALWAYS USE HAND PROTECTION OR CAUSE PROPERTY DAMAGE.
Page 5: Installation
I N S TA L L AT I O N S I T E I N S TA L L AT I O N AR-7E FLAT GLASS DOOR SINGLE PANE DOUBLE PANE CURVED GLASS DOOR PASS-THROUGH OPTION PASS-THROUGH OPTION Steam Vent...
Page 6 I N S TA L L AT I O N S I T E I N S TA L L AT I O N AR-7VH VENTLESS HOOD WITH CURVED DOOR VENTLESS HOOD WITH FLAT DOOR PASS-THROUGH OPTION PASS-THROUGH OPTION SIDE VIEW SIDE VIEW FRONT VIEW AR -7E Rotis serie with A R-7VH Ventless Hood Operation &...
Page 7 I N S TA L L AT I O N E L E C T R I C A L C O N N E C T I O N The appliance must be installed by a qualified service technician. The oven must be properly “WA R NIN G”...
Page 8 6" (152mm) leg assembly 5001414 or 5" (127mm) casters 4007. : 54-7/16" (1384mm)] OVERALL HEIGHT AR-7VH ventless hood over AR-7E rotisserie over AR-7H companion holding cabinet Requires 6" (152mm) legs with flanged feet 5001761 bolted to the floor. : 90-13/16" (2307mm)]...
Page 9 OVER STACKING ASSEMBLY ITEM PART PART DESCRIPTION 1010092 BRACKET, SUPPORT, BASE BU-33948 BUSHING, STRAIN RELIEF, 18MM-25MM AR-7E CD-3987 CORD, 8/4 SEEO W-A, 105C, (-50C) CR-3801* CONNECTORS, *CT, RING, 10MM, SQ/M6 NU-2437 NUT, 1/4-20 HEX S/S SC-2191 SCREW, HEX HEAD, 5/16-18 X 1" LONG SC-27385 SCREW, 1/4/20 X 3/4"...
Page 10 SPITS ANGLED SPIT STAINLESS STEEL SI-25729 PIERCING SPIT STAINLESS STEEL SI-26980 TURKEY SPIT STAINLESS STEEL 5001335 ANGLED SPIT TEFLON COATED AR-7E AR-7H (208-240V, 1PH) OVER 5008787 STACKING ASSEMBLY AR-7E AR-7H (208-240V, 3PH) OVER 5008948 FACTORY INSTALLED AR-7E AR-7H (380-415V) OVER...
Page 11 O P E R AT I N G I N S T R U C T I O N S CONTROL IDENTIFICATION Cook Cycle Indicator Bar Holding Indicator Bar Product Ready Indicator Bar Preheat Indicator Bar UP Arrow Key Cook Time Indicator Bar 1 LED Display DOWN Arrow Key Cook Time Indicator Bar 2...
Page 12 • The product will continue to cook as it decreases from the cooking temperature to the holding temperature.For best results, always allow for product temperature override. AR-7E Rotiss erie with A R-7VH Ventless Hood Operation & Care Manual • 11...
Page 13 O P E R AT I N G I N S T R U C T I O N S A D D I T I O N A L B R O W N I N G F E AT U R E The control allows the operator to set a specific period of time for additional browning between the end of the ready COOK TIME and the illumination of the PRODUCT READY BAR at the end of the cooking cycle.
Page 14 O P E R AT I N G I N S T R U C T I O N S P R E S E T M E N U K E Y O P T I O N The Alto-Shaam rotisserie provides the operator with the ability to set as many as seven cooking programs. Each cooking program can be preset to include all cooking and holding functions.
Page 15: Fa H Re Nheit Or Celsius Selection
O P E R AT I N G I N S T R U C T I O N S ATTENTIO N C H I C K E N W H O L E CHICKEN After programming a specific product into memory on a QUARTERS T U R K E Y B R E A S T preset key number, it is suggested the product be...
Page 16: Important Note
O P E R AT I N G I N S T R U C T I O N S O P E R AT I N G I N S T R U C T I O N S P R O D U C T L O A D I N G STANDARD SPITS Each of the seven rotisserie spits includes two...
Page 17 O P E R AT I N G I N S T R U C T I O N S P R O D U C T L O A D I N G STANDARD SPIT Insert whole chickens with the legs toward the square end of the spit. Load up to 3, 3-1/2 lb (1,6 kg) chickens per spit for a total of 21 chickens or 4, 2-1/2 lb (1,1 kg) chickens for a total of 28 whole chickens.
Page 18 O P E R AT I N G I N S T R U C T I O N S O P E R AT I N G I N S T R U C T I O N S CHICKEN, HALVES OR PIECES (8- PIECE CUT : 2-1/2 to 3 lb (1,1 to 1,4 kg)
Page 19 O P E R AT I N G I N S T R U C T I O N S CHICKEN, WHOLE : 2-1/2 to 3 lb (1,1 to 1,4 kg) CAPACITY SUGGESTED SPIT STANDARD OR PIERCING SPIT REMOVE PRODUCT IMMEDIATELY USE THE FOLLOWING DIRECTIONS WHEN WHEN INTERNAL TEMPERATURE IS REACHED LONG-TERM HOLDING IN THE ROTISSERIE...
Page 20 O P E R AT I N G I N S T R U C T I O N S TURKEY BREAST PORK RIBS : 5-1/2 lb (2,5 kg) : 2-3/4 CAPACITY CAPACITY DOWN TOTAL TURKEY BREASTS TOTAL FULL SLABS PER BASKET SUGGESTED SPIT BASKET SUGGESTED SPIT...
Page 21 O P E R AT I N G I N S T R U C T I O N S PORK LOIN, BONELESS LAMB LEG, BONELESS : 5 to 7 lb (2,3 to 3,2 kg) : 8 to 11 lb (4 to 5 kg) CAPACITY AVERAGE WEIGHT CAPACITY...
Page 22: Care And Cleaning
C A R E A N D C L E A N I N G C L E A N I N G A N D P R E V E N T I V E M A I N T E N A N C E PROTECTING STAINLESS STEEL SURFACES CLEANING AGENTS It is important to guard against...
Page 23 C A R E A N D C L E A N I N G EQUIPMENT CARE Under normal circumstances, this oven should provide you with long and trouble free service. There is no preventative maintenance required, however, the following Equipment Care Guide will maximize the potential life and trouble free operation of this oven.
Page 24 C A R E A N D C L E A N I N G D A I LY G A S K E T C L E A N I N G It is important to prolong the life of the oven gasket by Routine cleaning will help protect the composition of cleaning this item on a daily basis.
Page 25: Troubleshooting Guide
S E R V I C E T R O U B L E S H O O T I N G G U I D E ERROR P O S S I B L E C AU S E D E S C R I P T I O N R E S U LT S C O D E...
Page 26 S E R V I C E D A N G E R N G E R L O C K - O U T O R P O S T DISCONNECT UNIT FROM B R E A K E R PA N E L U N T I L POWER SOURCE BEFORE S E R V I C E W O R K H A S CLE NING OR SERVICING.
Page 27 S E R V I C E I N T E R I O R S E R V I C E V I E W Lamp Assembly Radiant Heater LP-34185 208V - EL-33974 240V - EL-33973 B U L B R E P L A C E M E N T I N S T R U C T I O N S To Replace Bulbs: Remove four screws holding glass light cover (CV-26607) and gasket (GS-26609)in place, taking...
Page 28 S E R V I C E S E R V I C E V I E W 1 SI-25729 BS-26019 Spit, Piercing Rod, S/S Basket, Wire Form, S/S (option) (option) DV-26648 Drive, Disk Hub, S/S DV-26863 1001636 Drive, Tube Assembly Drive, Disk DV-26108 Slave, Disk Hub...
Page 29: Door Replacement
S E R V I C E S E R V I C E V I E W 2 : S I N G L E PA N E F L AT G L A S S D O O R R N I N G DOOR REPLACEMENT: STEP 1: REMOVE TOP PIN (PI-26350) FROM...
Page 30 S E R V I C E S E R V I C E V I E W 3 : S TA I N L E S S S T E E L B A C K PA N E L NOTE: TO INSTALL A SOLID STAINLESS STEEL BACK PANEL, REMOVE GASKET AND ALL...
Page 31 S E R V I C E S E R V I C E V I E W 4 : D O U B L E PA N E C U R V E D G L A S S D O O R DOOR REPLACEMENT: R N I N G STEP 1: REMOVE TOP PIN (PI-26350) FROM BRACKET...
Page 32 S E R V I C E S E R V I C E V I E W 4 A : D O U B L E PA N E C U R V E D G L A S S D O O R 5008322 5007824 INNER GLASS...
Page 33 S E R V I C E S E R V I C E V I E W 5 : E L E C T R I C A L SN-33540 SC-2254 BK-33546 (NOT SHOWN) 6-32 x 3/8 1002261 EL-33974 (208V) EL-33973 (240V) 1002048 DETAIL A...
Page 34 S E R V I C E S E R V I C E V I E W 5 A : E L E C T R I C A L A R-7E Rotiss erie wi th A R-7VH Ventless Hood Operation & Care Manual • 33...
Page 35 S E R V I C E PA R T S L I S T S E R V I C E PART DESCRIPTION PART NO PART DESCRIPTION PART NO FULL ASSEMBLY SERVICE VIEW SERVICE VIEW 2 PANEL, CONTROL SIDE ACCESS DOOR ASSEMBLY, CONTROL SIDE, FLAT 5006806 5000949...
Page 36 S E R V I C E PART DESCRIPTION PART NO PART DESCRIPTION PART NO SERVICE VIEW 5: SERVICE VIEW 5A: AIR DUCT 1002068 SWITCH, FAN FAIL SW-33907 AIR DUCT 1002068 AIR DUCT MOUNTING BRACKET 1002069 TRANSFORMER TN-33460 BEARING BRACKET ASSEMBLY 5000967 RELAY, POWER RL-33930...
Page 37 V E N T L E S S H O O D U N PA C K I N G & S E T- U P The Alto-Shaam Ventless Hood has been thoroughly tested and inspected to ensure only the highest quality unit is provided.
Page 38 V E N T L E S S H O O D H O O D C L E A N I N G & M A I N T E N A N C E To ensure optimum performance N G E R from the ventless hood, it is important to establish and maintain a regular...
Page 39 V E N T L E S S H O O D - S E R V I C E F I N A L F L O O R ( R I G H T H A N D S H O W N ) E L E C T R I C A L A S S E M B LY ( C L O S E U P - 5 0 0 8 9 1 9 ) A R-7E Rotiss erie wi th A R-7VH Ventless Hood Operation &...
Page 40 V E N T L E S S H O O D - S E R V I C E NOT SHOWN ITEM DES C RIPTIO N PA RT N O . Q TY SPRING, CT M6 48, SAFETY SD-22194 WASHER, SAFETY, STEEL WS-22195 STUD, CT M6...
Page 41 V E N T L E S S H O O D - S E R V I C E F U L L A S S E M B LY ( R I G H T H A N D , C U R V E D D O O R , PA S S T H R O U G H S H O W N ) M O DEL >...
Page 42: Transportation Damage And Claims
TRANSPORTATION LIMITED DAMAGE and CLAIMS WARRANTY ® All Alto-Shaam equipment Alto-Shaam, Inc. warrants to the original purchaser only that any original part that is found to be defective in material or workmanship is sold F.O.B. shipping will, at Alto-Shaam's option, subject to provisions hereinafter stated, be point, and when accepted replaced with a new or rebuilt part.

This manual is also suitable for:

Ar-7vh