Reset Button - Planet WAP-4035 User Manual

the coverage. Please check the specification of the antenna you want to use, and make sure it can
be used on WAP-4035.
4. WLAN Type
If WAP-4035 is installed in an 802.11b and 802.11g mixed WLAN, its performance will be reduced
significantly. Because every 802.11g OFDM packet needs to be preceded by an RTS-CTS or CTS
packet exchange that can be recognized by legacy 802.11b devices. This additional overhead
lowers the speed. If there are no 802.11b devices connected, or if connections to all 802.11b devices
are denied so that WAP-4035 can operate in 11g-only mode, then its data rate should actually
54Mbps.
1.5

Reset Button

WAP-4035 provides a Reset button on the rear panel for user to restart or set WAP-4035 configuration to
factory default.
Time
Press less than 5 Sec.
Press more than 5 Sec.
Active
WAP-4035 will re-boot itself, keeping your original configurations
WAP-4035 will reset itself to the factory default settings
9