Page 2
Read all instructions before commencing installations NOTES: � The fans should not be sited where it would be subject to a direct source of heat in excess � Where an open-flued oil or gas- fuelled of 40ºC. appliance is installed in the kitchen, extract ventilation can cause the spillage of flue �...
Switching off will activate operate whilst the switch is on. Switching off will activate TYPE EL100, EL150U, EL150 TYPE EL100, EL150U, EL150 the overrun timer. the overrun timer. Operation by light switch, remote switch or Operation by light switch, remote switch or remote sensor.
Page 7
Ø Ø Ø = 125 mm ED150 Ø = 180 mm Ø = 125 mm ED150 Ø = 180 mm Make sure rubber cable grommet is fitted onto cable before threading cable through fan backplate. Push fit the four screw cover plugs provided, with hollow end facing outwards if fixing to wall...
Page 12
Sensor/Timer Adjustments Model: MA only Clockwise to Clockwise to increase and anti- increase and anti- clockwise to decrease time clockwise to decrease time. or humidity sensor sensitivity. Model: HTR only Clockwise to increase and anti-clockwise to decrease time or humidity sensor sensitivity. Model SCPC adjustments, see additional information supplied with fan.
Need help?
Do you have a question about the EL100 and is the answer not in the manual?
Questions and answers