Table of Contents
Advertisement
> Before Start
> Part Names
AV Adjust
1
By pressing the
button on the remote controller during play, you can adjust frequently
used settings, such as the sound quality, using on-screen menus. Note that there is no
display on the TV screen when the input selector is "TUNER", so follow the sound system
controller's display while doing the operations.
1. Press
on the remote controller.
2. After the AV Adjust screen is displayed, select the content with
controller and press ENTER to confirm your selection.
AV Adjust
Tone
Level
Other
0 Change the initial values for each of the settings with the cursors /
0 To return to the previous screen, press
3. To exit the settings, press
.
> Install
/
on the remote
BD/DVD
Bass
Treble
.
.
> Setup
> Playback
■ Tone
Bass: Enhance or moderate the bass range of the speaker.
Treble: Enhance or moderate the treble range of the speaker.
0 It cannot be set if the listening mode is Pure Direct.
■ Level
Subwoofer: Adjust the speaker level of the subwoofer while listening to some sound.
0 The adjustment you made will be reset to the previous status when you turn the unit to
standby mode.
■ Other
Sound Delay: If the video is behind the audio, you can delay the audio to offset the gap.
Different settings can be set for each input selector.
0 This cannot be set if the listening mode is Pure Direct and the input signal is analog.
Sound Retriever: Improve the quality of the compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The setting can be separately set to each
input selector. The setting is effective in the signals of 48 kHz or less. The setting is not
effective in the bitstream signals.
0 It cannot be set if the listening mode is Pure Direct.
DRC: Make small sounds easily heard. It is useful when you need to reduce the volume
while watching a movie late night. This be set when signals are Dolby or DTS input signals
are being played.
0 It cannot be set if the listening mode is Pure Direct.
0 If "Loudness Management" is set to "Off", this function is not available when playing Dolby
Digital Plus or Dolby TrueHD.
Panorama: Broaden the sound field laterally when playing in the Dolby Pro Logic Ⅱ Music
listening mode.
Dimension: Adjust the depth of the sound field in the front to back direction when playing in
the Dolby Pro Logic Ⅱ Music listening mode. Set a small number to move the sound towards
the front. Set a large number to move the sound back.
Firmware Update | Others
E
N
23
Advertisement
Table of Contents
