Table of Contents
Advertisement
KENT TECHNOLOGY - A Breakthrough in
Water Purification*
TM
Presenting the
KENT
Prime Mineral RO Water Purifier;
it uses futuristic and state-of-the-art technology to provide
purer & healthier drinking water.
TM
The heart of
KENT
Prime Mineral RO Water Purifier is a
Reverse Osmosis membrane having capillaries as small as
0.0001 microns that reduces even dissolved impurities (salts
and heavy metals) and converts hard water to sweet and purer
TM
drinking water.
KENT
Prime Mineral RO Water Purifier also
allows the user to control the Total Dissolved Solids (TDS) level
in purified water.
KENT is pleased to introduce Save Water Technology that helps you save and store water from KENT RO
Purifiers as well as from other RO purifiers.
As a part of Save Water Technology, KENT introduces RO Reject Water Storage Tank, which can be
purchased separately and then installed and connected to your KENT RO Purifier. This tank stores the
rejected water from the purifier, which can be used for washing utensils and mopping the floor. This unique
technology helps you recover more than 50% water, thus reducing wastage.
Salient Features of KENT Prime Mineral RO
Double treatment by RO + UV* processes
n
RO water recovery >50%.**
n
High Purification efficiency of 20 L /hr
n
Inbuilt auto flushing system.
n
Membrane with high flow. .
n
Inbuilt TDS Controller that allows adjustment of
n
TDS level of purified water
Suitable for purification of Brackish / Tap Water /
n
Municipal Corporation Water Supply.
Wall mounted design; best suited for indian
n
homes and offices
9 L storage tank with water level indicator
n
Fully automatic operation, with auto-on and
n
auto-off function
Items in the Box
TM
1.
KENT
Prime
Mineral RO
Water Purifier
2.
3-Way Connector
3.
S.S. Ball Valve
Food Grade Pipe ¼ inch (White)
4.
5.
Food Grade Pipe
inch (White)
6.
Instruction Manual
7.
Screws & Plastic Inserts
8.
Sticker Center Drill
* Tested & Certified by TUV-SUD South Asia (P) Ltd. ** Recovery more than 50% is based on the standard testing conditions.
TM
TM
Water Purifier
Computer
controlled operations for enhanced
n
purity and long life
Filter Change Alarm* to indicate filter
n
replacement time
UV Fail Alarm* to indicate failure in UV system
n
RO Membrane fused inside membrane
n
housing to prevent tampering
Vertically mounted SMPS for protection from
n
water
Use of push-fit fittings for leakage and
n
maintenance free performance
An eye appealing design
n
ABS construction for corrosion free use
n
:
01 No.
:
01 No.
:
01 No.
:
2.5 Meters
:
2.5 Meters
:
01 No.
:
02 Nos. each
:
01 No.
1
Important Instructions
Avoid exposure to direct sunlight
and installation in damp areas.
Reject Water
Drain
Make sure that the reject water pipe is
not placed at a level higher from the
purifier, otherwise reject water may
flow backwards into the purifier.
Avoid sharp bends in the pipe.
Do not bend or block the reject
water pipe.
In case of not using the purifier for more than two
days, kindly switch off the power supply and drain
the storage tank.
Use Genuine KENT spares for optimum performance
2
Make sure that the temperature
of water entering the purifier is
within 10° C - 40° C
10 M
Water Source
Water in
The maximum distance between the
water source and the purifier should
not be more than 3 meters.
Do not confine the
purifier in a cabinet.
To keep the storage tank
clean, it should be drained
once in 15 days.
Do not try to service the purifier on your own. Instead,
call service technician for help.
Advertisement
Table of Contents
