Advertisement
WARNING:
not plug in the sander until you have
read and understand this Instruction
Manual. Learn the tool's applications
and limitations, as well as the specific
potential hazards related to this tool.
Following this rule will reduce the risk of
electric shock, fire, or serious injury.
Always wear eye protection.
Any power tool can throw
foreign objects into your eyes
and cause permanent eye
damage. ALWAYS wear safety goggles
(not glasses) that comply with ANSI safety
standard Z87.1. Everyday glasses have
only impact resistant lenses. They ARE
NOT safety glasses.
WARNING:
not in compliance with ANSI Z87.1
could cause serious injury when they
break.
WARNING:
mask when sanding.
WARNING:
protection when sanding, particularly
during extended periods of operation.
WARNING:
tool from the power source before
changing the sanding disc or buffing
pad and when cleaning the tool.
Do not wear gloves, neckties or loose
clothing.
SPECIFIC SAFETY RULES
Know your sander. Do
Glasses or goggles
Always use a dust
Always use hearing
Always unplug the
SAVE THESE INSTRUCTIONS FOR REFERENCE
Secure the workpiece. Use clamps or a
vice to hold the work when practical. It is
safer than using your hand and it frees
both hands to operate the tool.
Do not sand material too small to be
securely held.
Make sure there are no nails or foreign
objects in the part of the workpiece to be
sanded.
Always keep hands out of the path of the
sanding pad. Avoid awkward hand
positions where a sudden slip could cause
your hand to move into the path of the
sanding pad.
To avoid injury from accidental starting,
always remove the plug from the power
source before installing or removing
sandpaper or the dust duct bag.
8
Advertisement
