Driving Position Memory System - Acura TLX Owner's Manual

Driving Position Memory System

You can store two driver's seat (except for power lumbar and thigh support
door mirror positions with the driving position memory system.
When you unlock and open the driver's door with a remote transmitter, or keyless
access system, the seat and door mirrors adjust automatically to one of the two
preset positions.
When you enter the vehicle, the multi-information display briefly shows you which
remote transmitter you used to unlock the vehicle.
• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.
DRIVER 1 DRIVER 2
* Not available on all models
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
The driver's seat moves rearward depending
on the set seating position once you
• Stop the vehicle.
• Put the transmission in P . (
• Turn the engine off.
• Then open the driver's door.
Once the power mode is in the ACCESSORY
position, the driver's seat moves forward to
the DRIVER 1 or 2 preset position.
* ) and
1Driving Position Memory System
Using the information screen or multi-information
display, you can disable the automatic seat and door
mirror adjustment function.
2 Customized Features P. 120, 292
The driver's seat easy exit feature can be turned ON/
OFF.
2 Customized Features P. 120, 292
System Operation
The system will not operate if:
•
The vehicle speed is above 3 mph (5 km/h).
•
Either memory position button is pressed while the
seat is in motion.
•
The seat position is adjusted while in operation.
•
The memory 1 or 2 position is set fully to the rear.
Continued 173