Installation Diagram Solution 1 Solution 2 Internet Internet AC CORE GATEWAY CORE SWITCH POE POWER SUPPLY POE SWITCH POE SWITCH …… …… …… Note: Solution 1 (Single Device Setting): Get into the web setting page independently. Solution 2 (Multiple Devices Setting): Do centralized management settings and local portal by AC core gateway.
2.2 Wall-mounted Installation ①Remove the chassis of ②Connect the LAN port ③Fix chassis on the AP the AP, and fix it on the of the device by cable. (If appropriately. ceiling by screws. there are multiple devices, please connect the WAN port of the device by cable for centralized manage- ment.)
Page 4
3.3 Open the computer browser, and input 192.168.10.1 to get into the device login page. The device is defaulted as Router Mode. When you login at the first time, you need to set a password. The device language has Chinese and English to be chosen, and you can set up the language by the top right corner icon Language...
Page 5
After setting, other mobile devices can connect the device SSID to surf the internet. English Logout status information Lan Settings WiFi 2.4G finish Wizard Network 2.4G wireless SSID FS.COM Users Enter or 8-32 Characters Password System Firewall Advanced setting Bandwidth 20MHz Country China Channel...
Page 6
System 255.255.255.0 Subnet mask Firewall 2.4G SSID FS.COM Prev finish 3.7 Bridge Mode: Please ensure that WDS in the upper network is enabled. AP device can set up intranet segment, and then select the wireless SSID signal you need to bridge and input wireless password.
Page 7
Network Bridge settings 2.4GHz Scan Bind System scan SSID FS.COM Firewall Enter or 8-32 Characters Password Prev Next ① Select “DHCP” and the device will automatically receive IP address segment from the upper network. English Logout status information...
Page 8
English Logout status information Wizard Lan Settings Bridge Wireless WiFi 2.4G finish settings settings Network 2.4G Wireless System SSID FS.COM Firewall Password FS.COM Next Prev English Logout status information Wizard Lan Settings Bridge Wireless finish WiFi 2.4G settings settings Network...
Page 9
Firewall Subnet mask 255.255.255.0 Next Prev English Logout status information Wizard Wireless settings Lan Settings WiFi 2.4G finish Network 2.4G Wireless SSID FS.COM System Password FS.COM Firewall advanced setting Bandwidth 20MHz Country China Channel auto Prev Next English Logout status information...
Page 10
Subnet mask 255.255.255.0 Firewall Prev Next English Logout status information Wireless settings Lan Settings WiFi 2.4G finish Wizard 2.4G Wireless Network SSID FS.COM System Password FS.COM Firewall advanced setting Bandwidth 20MHz Country China Channel auto Prev Next English Logout status information...
Page 11
System Subnet mask 255.255.255.0 Firewall Prev Next English Logout status information Wireless settings Lan Settings WiFi 2.4G finish Wizard 2.4G Wireless Network FS.COM SSID System FS.COM Password Firewall advanced setting Bandwidth 20MHz Country China Channel auto Next Prev English Logout...
Need help?
Do you have a question about the AP-D1200 and is the answer not in the manual?
Questions and answers