Summary of Contents for Gkit Baby Pre
- Page 1 Assembly Guide “Baby Pre” v4.1 Designed by: Robert-Eric & Peter Gaskell December 2016...
-
Page 2: Assembly Guide
Assembly Guide The Board Thank you for your interest in the GKit BabyPre. The BabyPre kit is not only a way to Your BabyPre’s circuit board has been carefully laid out to make assembly and get an excellent 2-channel mic pre at a very reasonable price, it is also an educational trouble shooting as easy as possible. - Page 3 Components The components for the GKit BabyPre have been carefully bagged and labelled to make assembly as simple as possible. We recommend you populate the components in order of the bag #s. Start with the resistors and move on to the taller components.
-
Page 4: Troubleshooting
Leaving the BabyPre set to 60dB of gain, turn off the signal generator. This CONGRATULATIONS! You're GKit should now be complete and ready to use. will leave only the BabyPre’s Equivalent Input Noise(EIN) floor. The level of the signal returning to the DAW should be less than -58 dB FS. -
Page 5: Bill Of Materials
Schematics Bill of Materials Gkit - Baby Pre v4.1 (Dec. 2016) Signal Flow Diagram www.gklaudio.com/gkit@babypre Educational 2Ch. Mic Pre Kit With Clean / Coloured Gain Designator Type Value/Model# Qty. Number 1/2W&Resistor 2K7&Ω 1/4W&Resistor 383&Ω 1/4W&Resistor 82&Ω R4,&R17,&R18,&R23,&R27,&R34 1/4W&Resistor 20K&Ω... - Page 6 ...
- Page 7 BabyPre will be coming in for repairs. Copyright: The GKit - Baby Pre is protected by Copyright © 2013-2016 - GKL Audio. All rights reserved. No part of this manual or the GKit - BabyPre including, but not limited to, the text, graphics, images, logos, electronic...
Need help?
Do you have a question about the Baby Pre and is the answer not in the manual?
Questions and answers