Table of Contents
Advertisement
Quick Links
Our company network supports you worldwide with offices in Germany, Austria,
Switzerland, Great Britain and the USA. For more information please contact:
FORTEC Elektronik AG
Hauptniederlassung
Lechwiesenstr. 9
86899 Landsberg am Lech
Telefon:
+49 (0) 8191 91172-0
Telefax:
+49 (0) 8191 21770
E-Mail:
sales@fortecag.de
Internet:
www.fortecag.de
FORTEC Elektronik AG
Büro Wien
Nuschinggasse 12
A-1230 Wien
Telefon:
+43 1 8673492-0
Telefax:
+43 1 8673492-26
E-Mail:
office@fortec.at
Internet:
www.fortec.at
The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.
Manual
COMe-mBT10
Kontron
FORTEC Elektronik AG
Büro West
Hohenstaufenring 55
50674 Köln
Telefon:
+49 (0) 221 272 273-0
Telefax:
+49 (0) 221 272 273-10
E-Mail:
west@fortecag.de
Internet:
www.fortecag.de
ALTRAC AG
(Tochter der FORTEC):
Bahnhofstraße 3
CH-5436 Würenlos
Telefon:
+41 (0) 44 7446111
Telefax:
+41 (0) 44 7446161
E-Mail:
info@altrac.ch
Internet:
www.altrac.ch
Advertisement
Table of Contents
Summary of Contents for Fortec Star COMe-mBT10
- Page 1 Manual COMe-mBT10 Kontron Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln...
- Page 2 COMe-mBT10 Document Revision 120 valid for Rev. 02.00 and higher www.kontron.com...
-
Page 4: Table Of Contents
» Table of Contents « User Information..................5 About This Document........................5 Copyright Notice.......................... 5 Trademarks..........................5 Standards........................... 5 Warranty............................ 6 Technical Support......................... 6 Introduction..................7 Product Description........................7 Naming clarification........................7 Understanding COM Express® Functionality..................8 COM Express® Documentation......................9 COM Express® Benefits........................ - Page 5 COMe-mBT10 / LPC............................29 Serial Peripheral Interface (SPI)....................30 boot............................ 30 M.A.R.S............................ 32 UART............................33 Fast I2C............................ 34 4.10 Dual Staged Watchdog Timer......................35 4.11 Speedstep Technology......................... 36 4.12 C-States............................ 37 4.13 Graphics Features........................38 4.14 ACPI Suspend Modes and Resume Events..................39...
-
Page 6: User Information
COMe-mBT10 / User Information 1 User Information About This Document This document provides information about products from Kontron Europe GmbH and/or its subsidiaries. No warranty of suitability, purpose, or fitness is implied. While every attempt has been made to ensure that the information in this document is accurate, the information contained within is supplied “as-is”... -
Page 7: Warranty
COMe-mBT10 / User Information Warranty For this Kontron Europe GmbH product warranty for defects in material and workmanship exists as long as the warranty period, beginning with the date of shipment, lasts. During the warranty period, Kontron Europe GmbH will decide on its discretion if defective products are to be repaired or replaced. -
Page 8: Introduction
Express® form factor standard. The new Kontron COMe-mBT10 COM Express® mini Computer-on-Module family (55 mm x 84 mm) with Type 10 pin-out is equipped with Intel® Atom™ processor E3800 or Intel® Celeron® processors. Several module variants are included in the range, offering wide scalability from low-power single-core Intel®... -
Page 9: Understanding Com Express® Functionality
COMe-mBT10 / Introduction Understanding COM Express® Functionality All Kontron COM Express® basic and compact modules contain two 220pin connectors; each of it has two rows called Row A & B on primary connector and Row C & D on secondary connector. COM Express® Computer-on-modules feature the... -
Page 10: Com Express® Documentation
This product manual serves as one of three principal references for a COM Express® design. It documents the specifications and features of COMe-mBT10. Additional references are available at your Kontron Support or at PICMG®: » The COM Express® Specification defines the COM Express® module form factor, pin-out, and signals. This document is available at the PICMG®... -
Page 11: Product Specification
The COM Express® mini sized Computer-on-Module COMe-mBT10 (MVV1) follows pin-out Type 10 and is compatible to PICMG specification COM.0 Rev 2.1. The COMe-mBT10, based on Intel's Bay Trail platform, is available in different variants to cover the demand of different performance, price and power: Industrial temperature grade modules (E2: -40°C to +85°C operating) - Page 12 COMe-mBT10 / Product Specification Memory configurations: (3400x-MMFF-xx-x) » MM = 10: 1024MB DDR3L Memory (8x1Gbit / 128Mx8) » MM = 20: 2048MB DDR3L Memory (8x2Gbit / 256Mx8) » MM = 40: 4096MB DDR3L Memory (8x4Gbit / 512Mx8) Onboard Flash configurations »...
-
Page 13: Functional Specification
COMe-mBT10 / Product Specification Functional Specification Processor The 32nm Intel® Atom™ E3800 / Celeron® (BayTrail-I/M/D) CPU family supports: » Intel® 64 » Enhanced Intel SpeedStep® Technology » Thermal Monitoring Technologies » Execute Disable Bit » Virtualization Technology VT-x » 2 Display Pipes for dual independent displays CPU specifications Intel®... - Page 14 COMe-mBT10 / Product Specification Graphics Core The integrated Intel® HD Graphics (Gen 7) supports: Graphics Core Render Clock Intel® HD Graphics (Gen 7), 311-542MHz Clock, 667-854MHz Turbo Execution Units / Pixel Pipelines 2048MB Max Graphics Memory up to 21.3 GFX Memory Bandwidth (GB/s)
- Page 15 SD Storage SD Boot MIPI-CSI PCI Express Configuration By default, the COMe-mBT10 supports x1 PCIexpress lane configuration only (Configuration 0). Following x2/x4 configurations are available via Management Engine Softstrap Options with a customized Flash Descriptor. PCIe Port #0 Port #1...
- Page 16 COMe-mBT10 / Product Specification Additional features » All solid capacitors (POSCAP). No tantalum capacitors used. » Optimized RTC Battery monitoring to secure highest longevity » Real fast I2C with transfer rates up to 40kB/s. » Discharge logic on all onboard voltages for highest reliability...
-
Page 17: Block Diagram
COMe-mBT10 / Product Specification Block Diagram... -
Page 18: Accessories
For all CPUs and temperature grades 34006-0000-99-1 HSP COMe-mBT10 through (11mm) For all CPUs and temperature grades 34006-0000-99-2 HSP COMe-mBT10 slim thread (6.5mm) For all CPUs and temperature grades 34006-0000-99-3 HSP COMe-mBT10 slim through (6.5mm) For all CPUs and temperature grades... -
Page 19: Electrical Specification
» Maximum 100 mV peak to peak 0 – 20 MHz 3.5.4 Power Consumption The maximum Power Consumption of the different COMe-mBT10 variants is 5.6 - 12.1W (100% CPU load on all cores; 90°C CPU temperature). Further information with detailed measurements are available in Application Note KEMAP054 available EMD Customer... -
Page 20: Atx Mode
COMe-mBT10 / Product Specification 3.5.5 ATX Mode By connecting an ATX power supply with VCC and 5VSB, PWR_OK is set to low level and VCC is off. Press the Power Button to enable the ATX PSU setting PWR_OK to high level and powering on VCC. The ATX PSU is controlled by the PS_ON# signal which is generated by SUS_S3# via inversion. -
Page 21: Power Control
COMe-mBT10 / Product Specification Power Control Power Supply The COMe-mBT10 supports a power input from 4.75 - 20V. The supply voltage is applied through the VCC pins (VCC) of the module connector. Power Button (PWRBTN#) The power button (Pin B12) is available through the module connector described in the pinout list. To start the module via Power Button the PWRBTN# signal must be at least 50ms (50ms ≤... -
Page 22: Environmental Specification
COMe-mBT10 / Product Specification Environmental Specification 3.7.1 Temperature Specification Kontron defines following temperature grades for Computer-on-Modules in general. Please see chapter 'Product Specification' for available temperature grades for the COMe-mBT10 Temperature Specification Operating Non-operating Validated Input Voltage Commercial grade 0°C to +60°C -30°C to +85°C... -
Page 23: Standards And Certifications
COMe-mBT10 / Product Specification Standards and Certifications RoHS II The COMe-mBT10 is compliant to the directive 2011/65/EU on the Restriction of the use of certain Hazardous Substances (RoHS II) in electrical and electronic equipment Component Recognition UL 60950-1 The COM Express® mini form factor Computer-on-Modules are Recognized by Underwriters Laboratories Inc. -
Page 24: Mtbf
COMe-mBT10 / Product Specification MTBF The following MTBF (Mean Time Before Failure) values were calculated using a combination of manufacturer’s test data, if the data was available, and the Telcordia (Bellcore) issue 2 calculation for the remaining parts. The calculation method used is “Telcordia Issue 2 Method 1 Case 3” in a ground benign, controlled environment (GB,GC). -
Page 25: Mechanical Specification
COMe-mBT10 / Product Specification 3.10 Mechanical Specification Module Dimension » 55mm x 84mm (±0.2mm) » Height approx. 3.5mm (withouth printed circuit board) CAD drawings are available at EMD CustomerSection Height The COM Express® specification defines a module height of 13mm from bottom to heatspreader top: Kontron provides standard HSP for the specified height of 13mm and slim-line Heatspreader for a reduced height of 8.5mm for mini sized Computer-on-Modules. -
Page 26: Module Dimensions
COMe-mBT10 / Product Specification 3.11 Module Dimensions All dimensions in mm 3.12 Onboard Fan Connector Specification » Part number (Molex) J3: 53261-0371 » Mates with: 51021-0300 » Crimp terminals: 50079-8100 Pin assignment » Pin1: Tacho, Pin2: VCC, Pin3: GND Electrical characteristic Module Input Voltage 4.75 - 13V... -
Page 27: Thermal Management, Heatspreader And Cooling Solutions
Thermal Management, Heatspreader and Cooling Solutions A heatspreader plate assembly is available from Kontron Europe GmbH for the COMe-mBT10. The heatspreader plate on top of this assembly is NOT a heat sink. It works as a COM Express®-standard thermal interface to use with a heat sink or external cooling devices. -
Page 28: Features And Interfaces
COMe-mBT10 / Features and Interfaces 4 Features and Interfaces Onboard eMMC Flash The COMe-mBT10 features a 14x18mm onboard Micron NAND Flash drive with capacities of 2-64GB eMMC. The Flash drive includes a Phison PS8200 micro controller and supports: » JEDEC/MMC standard version 5.0 compliant »... -
Page 29: S5 Eco Mode
COMe-mBT10 / Features and Interfaces Secure Digital Card The COMe-mBT10 supports an SDIO Interface to be used for micro/mini/standard SD Card sockets. Following SD Cards are validated from Kontron and recommended for use: swissbit® S-200U & S-300U Series Industrial microSD Card »... -
Page 30: Lpc
COMe-mBT10 / Features and Interfaces The Low Pin Count (LPC) Interface signals are connected to the LPC Bus bridge located in the CPU or chipset. The LPC low speed interface can be used for peripheral circuits such as an external Super I/O Controller, which typically combines legacy-device support into a single IC. -
Page 31: Serial Peripheral Interface (Spi)
The SPI interface can only be used with a SPI flash device to boot from external BIOS on the baseboard. SPI boot The COMe-mBT10 supports boot from an external SPI Flash. It can be configured by pin A34 (BIOS_DIS#0) and pin B88 (BIOS_DIS1#) in following configuration: BIOS_DIS0#... - Page 32 COMe-mBT10 / Features and Interfaces Using an external SPI flash To program an external SPI flash follow these steps: » Connect a SPI flash with correct size (similar to BIOS ROM file size) to the module SPI interface » Open pin A34 and B88 to boot from the module BIOS »...
-
Page 33: M.a.r.s
COMe-mBT10 / Features and Interfaces M.A.R.S. The Smart Battery implementation for Kontron Computer-on-Modules called Mobile Application for Rechargeable Systems is a BIOS extension for external Smart Battery Manager or Charger. It includes support for SMBus charger/selector (e.g. Linear Technology LTC1760 Dual Smart Battery System Manager) and provides ACPI compatibility to report battery information to the Operating System. -
Page 34: Uart
COMe-mBT10 / Features and Interfaces UART The COMe-mBT10 supports up to two Serial RX/TX only Ports defined in COM Express® specification on Pins A98/A99 for UART0 and Pins A101/A102 for UART1. The implementation of the UART is compatible to 16450 and is supported by default from most operating systems. -
Page 35: Fast I2C
COMe-mBT10 / Features and Interfaces Fast I2C The COMe-mBT10 supports a CPLD implemented LPC to I2C bridge using the WISHBONE I2C Master Core provided from opencores.org. The I2C Interface supports transfer rates up to 40kB/s and can be configured in Setup Specification for external I2C: »... -
Page 36: Dual Staged Watchdog Timer
“feeding the watchdog” or “triggering the watchdog”). The intention is to bring the system back from the nonresponsive state into normal operation. The COMe-mBT10 offers a watchdog which works with two stages that can be programmed independently and used one by one. -
Page 37: Speedstep Technology
COMe-mBT10 / Features and Interfaces 4.11 Speedstep Technology The Intel® processors offer the Intel® Enhanced SpeedStep™ technology that automatically switches between maximum performance mode and battery-optimized mode, depending on the needs of the application being run. It enables you to adapt high performance computing on your applications. -
Page 38: C-States
COMe-mBT10 / Features and Interfaces 4.12 C-States New generation platforms include power saving features like SuperLFM, EIST (P-States) or C-States in O/S idle mode. Activated C-States are able to dramatically decrease power consumption in idle mode by reducing the Core Voltage or switching of parts of the CPU Core, the Core Clocks or the CPU Cache. -
Page 39: Graphics Features
COMe-mBT10 / Features and Interfaces 4.13 Graphics Features The integrated Intel® HD Graphics (Gen 7) graphics supports following OS dependent featureset: Win8 / WES8 Win7 / WES7 WEC7 Linux (F18/Yocto1.6) Linux (Tizen IVI 32b) Android 4.2/4.4 DP 1.1a up to 2560×1600... -
Page 40: Acpi Suspend Modes And Resume Events
COMe-mBT10 / Features and Interfaces 4.14 ACPI Suspend Modes and Resume Events The COMe-mBT10 supports the S-states S0, S3, S4, S5. S5eco Support: YES The following events resume the system from S3: » USB Keyboard (1) » USB Mouse (1) »... -
Page 41: Usb
COMe-mBT10 / Features and Interfaces 4.15 The COMe-mBT10 with PN 34006 supports up to 7x USB 2.0/1x USB 3.0 with following internal EHCI/xHCI configuration: The COMe-mBT10 with PN 34007 supports 4 USB 2.0 /1x USB 3.0 with following internal EHCI/xHCI configuration:... -
Page 42: System Resources
COMe-mBT10 / System Resources 5 System Resources Interrupt Request (IRQ) Lines IRQ # Used For Timer0 Keyboard Redirected secondary PIC Onboard - COM2 Onboard - COM1 SIO COM3 or 4 SIO COM3 or 4 SIO LPT or COM3/4 Free for PCI devices... -
Page 43: Peripheral Component Interconnect (Pci) Devices
COMe-mBT10 / System Resources 0A4-0A5 0A8-0A9 0AC-0AD 0B0-0B1 0B4-0B5 0B8-0B9 0BC-0BD 0B2-0B3 APM control ISA PnP 295-296 External Hardware monitor, optionally used by external SuperIO if present 2E8-2EF Serial port COM4 (SIO COM2) 2F8-2FF Serial port COM2 (onboard COM2) 370-377... -
Page 44: Lpc Addresses
COMe-mBT10 / System Resources LPC addresses I/O address Device 2Eh/2Fh external SuperI/O Winbond/Nuvoton 83627 4Eh/4Fh 0A80h/0A81h CPLD I2C Bus 8-bit Address 7-bit Address Device 0x2C S5eco resistor internal 0x2D USB HSIC Hub internal 0x60 DP2LVDS bridge internal 0x50 LVDS EEPROM... -
Page 45: Pinout List
COMe-mBT10 / Pinout List 6 Pinout List General Signal Description Type Description I/O-3,3 Bi-directional 3,3 V IO-Signal I/O-5T Bi-dir. 3,3V I/O (5V Tolerance) Bi-directional 5V I/O-Signal I/O-5 3,3V Input I-3,3 Bi-directional Input/Output Open Drain I/OD I-5T 3,3V Input (5V Tolerance) -
Page 46: Connector X1A Row A
COMe-mBT10 / Pinout List Connector X1A Row A Signal Description Type Termination Comment Power Ground PWR GND GBE0_MDI3- Ethernet Media Dependent Interface 3 - DP-I/O GBE0_MDI3+ Ethernet Media Dependent Interface 3 + DP-I/O GBE0_LINK100# Ethernet Speed LED GBE0_LINK1000# Ethernet Speed LED... - Page 47 COMe-mBT10 / Pinout List PCIE_TX3+ PCI Express Lane 3 Transmit + DP-O PCIE_TX3- PCI Express Lane 3 Transmit - DP-O Power Ground PWR GND PCIE_TX2+ PCI Express Lane 2 Transmit + DP-O PCIE_TX2- PCI Express Lane 2 Transmit - DP-O...
-
Page 48: Connector X1A Row B
USB 3.0 Transmit Pair 1 - DP-I Watch Dog Time-Out event O-3.3 AC/HDA_SDIN2 HD Audio Serial Data In 2 SDIN2 is not supported by COMe-mBT10 AC/HDA_SDIN1 HD Audio Serial Data In 1 I-3.3 PD 20k in CPU AC/HDA_SDIN0 HD Audio Serial Data In 0 I-3.3... - Page 49 COMe-mBT10 / Pinout List PCIE_RX3+ PCI Express Lane 3 Receive + DP-I PCIE_RX3- PCI Express Lane 3 Receive - DP-I Power Ground PWR GND PCIE_RX2+ PCI Express Lane 2 Receive + DP-I PCIE_RX2- PCI Express Lane 2 Receive - DP-I...
-
Page 50: Bios Operation
COMe-mBT10 / BIOS Operation 7 BIOS Operation The BIOS (Basic Input and Output System) or UEFI (Unified Extensible Firmware Interface) records hardware parameters of the system in the CMOS on the Computer-on-Module. It's major functions include execution of the POST(Power-On-Self- Test) during system start-up, saving system parameters and loading the operating system. - Page 51 COMe-mBT10 / BIOS Operation Menu Bar The menu bar at the top of the window lists different menus. Use the left/right arrow keys to make a selection. Legend Bar Use the keys listed in the legend bar on the bottom to make your selections or exit the current menu. The table below describes the legend keys and their alternates.
-
Page 52: Bios Setup
COMe-mBT10 / BIOS Operation BIOS Setup 7.5.1 Main Feature Options Description System Date [mm/dd/yyyy] Set the Date. Use 'Tab' to switch between Date elements System Time [hh:mm:ss] Set the Time. Use 'Tab' to switch between Time elements... - Page 53 COMe-mBT10 / BIOS Operation System Information...
- Page 54 COMe-mBT10 / BIOS Operation Boot Features Feature Options Description NumLock Selects Power-on state for NumLock Timeout Number of seconds that P.O.S.T will wait for the user input before booting CSM Support Enables or Disables the UEFI CSM (Compatibility Support Module)to support legacy PC boot process. Both legacy and UEFI...
- Page 55 COMe-mBT10 / BIOS Operation Platform Information...
-
Page 56: Advanced
COMe-mBT10 / BIOS Operation 7.5.2 Advanced Feature Options Description OS Selection Select the Operating System family to be booted Windows Linux Android... - Page 57 COMe-mBT10 / BIOS Operation Miscellaneous Feature Options Description I2C Speed Select I2C Bus Speed in kHz from 1kHz to 400kHz S5 Eco Disabled Enable/Disable Kontron S5 Eco mode. Reduces supply current in Soft Off (S5) to less than 1mA. If enabled, power button is...
- Page 58 COMe-mBT10 / BIOS Operation Watchdog Feature Options Description Auto-reload Enable automatic reload of watchdog timers on timeout Disabled Enabled Global Lock If set to enabled, all Watchdog registers (except WD_KICK) become read only until the board is reset Disabled Enabled...
- Page 59 COMe-mBT10 / BIOS Operation H/W Monitor Feature Value/Options Description CPU Temperature (Analog) xx°C Shows the measured temperature of the CPU Diode with onboard HWM CPU Temperature (DTS) xx°C Shows the internal digital CPU temperature (DTS) Module Temperature xx°C Shows the internal hardware-monitor temperature...
- Page 60 COMe-mBT10 / BIOS Operation CPU Configuration Feature Options Description Execute Disable Bit Execute Disable Bit prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS Enable Disable Limit CPUID Maximum Enable Disabled for Windows XP Disable Bi-directional PROCHOT# Enable When a processor thermal sensor trips (either core), the PROCHOT# will be driven.
- Page 61 COMe-mBT10 / BIOS Operation CPU Power Management Feature Options Description Intel® SpeedStep(TM) Enable/Disable processor performance states (P-States) Enabled Disabled Boot Performance Mode Select the performance state that the BIOS sets before OS hand-off Max Performance Max Battery Intel® Turbo Boost Technology...
- Page 62 COMe-mBT10 / BIOS Operation Uncore Configuration Feature Options Description Integrated Graphics Device Disable Enable: enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor. Disable: Always disable IGD Enable Primary Display Select which of IGD/PCIe Graphics Devices should be Primary Display or select SG for Switchable/Hybrid Graphics...
- Page 63 COMe-mBT10 / BIOS Operation IGD - LCD Control Feature Options Description IGD - Boot Type Select the Integrated Graphics Video Device activated during POST. LFP = Local Flat Panel (LVDS/eDP). EFP = Auto External Flat Panel (Display Port) IGD - Secondary Boot Type...
- Page 64 COMe-mBT10 / BIOS Operation System Component Feature Options Description PNP Setting Disable Select PNP setting mode, Disable, Performance, Power or Power&Performance mode Power & Performance Ax Stepping Bx Stepping...
- Page 65 COMe-mBT10 / BIOS Operation LAN Configuration Feature Options Description PXE ROM Enable/Disable PXE Option ROM execution for onboard LAN Disabled Onboard only Addon only Both...
- Page 66 COMe-mBT10 / BIOS Operation South Cluster Configuration...
- Page 67 COMe-mBT10 / BIOS Operation PCI Express Configuration Feature Options Description PCIe Speed Select PCIe Speed to Gen1 or Gen2 Auto Gen1 Gen2 PCI Express Root Port Disable Control the PCI Express Root Port Enable...
- Page 68 COMe-mBT10 / BIOS Operation USB Configuration Feature Options Description xHCI Mode Mode of operation of xHCI controller. This will also influence EHCI controller settings since certain combinations of those modes are Smart Auto not allowed. 'SMART Auto' Mode is requied for OS with external Driver (e.g. Windows 7), 'Enabled' is recommended for OS with Enable integrated USB 3.0 Support (e.g.
- Page 69 COMe-mBT10 / BIOS Operation Audio Configuration Feature Options Description Audio Controller Enable / Disable High Definition Audio interface Enable Disable - HDAudio VCi Enable Enable / Disable Virtual Channel 1 of Audio Controller Enable Disable - HDAudio Docking Support Enable...
- Page 70 COMe-mBT10 / BIOS Operation SATA Drives Feature Options Description Chipset SATA Enables or Disables the Chipset SATA Controller. The Chipset SATA controller supports the 2 internal SATA ports (up to 3Gb/s Enable supported per port) Disable SATA Test Mode Enables or Disables the SATA Test Mode...
- Page 71 COMe-mBT10 / BIOS Operation LPSS & SCC Configuration Feature Options Description LPSS & SCC Devices Mode ACPI Mode Select operation mode for Low Power Super Speed LPSS devices eMMC/SDCard. For eMMC full speed operation the LPSS mode should be set to “ACPI”...
- Page 72 COMe-mBT10 / BIOS Operation Miscellaneous Configuration Feature Options Description High Precision Timer Disable Enables or Disables the High Precision Event Timer Enable Boot Time with HPET Timer Boot time calculation with High Precision Event Timer enabled Disable Enable State After G3 S0 State Specify what state to go to when power is re-applied after a power failure (G3 state).
- Page 73 COMe-mBT10 / BIOS Operation SMBIOS Event Log Feature Options Description Event Log Enables or Disables the SMBIOS Event Log Disable Enable Mark SMBIOS events as read Mark SMBIOS events as read. Marked SMBIOS events won't be displayed Enter Clears SMBIOS events...
- Page 74 COMe-mBT10 / BIOS Operation View SMBIOS event log...
- Page 75 COMe-mBT10 / BIOS Operation SuperIO Configuration This setup option is only available with LPC SuperI/O Nuvoton 83627 present on the carrier board. By default the COMe- mBT10 supports the legacy interfaces of a 5V 83627HF(J) or 3.3V 83627DHG-P on external LPC. The SIO hardware monitor is not supported in setup.
- Page 76 COMe-mBT10 / BIOS Operation Onboard UART Configuration Feature Options Description Serial Port 0 Disabled Enable or Disable Serial Port (COM) 0 Enabled Base Address Configure Serial Port Base Address Configure Serial Port IRQ Serial Port 1 Disabled Enable or Disable Serial Port (COM) 1...
- Page 77 COMe-mBT10 / BIOS Operation Memory ECC Error Logging Feature Options Description Error Logging Enable Memory ECC Error Logging to SMBIOS Event Log. Please note that enabling ECC error logging is only useful on systems Disabled equipped with ECC memory. Changing the settings on a non-ECC system will have no effect...
-
Page 78: Security
COMe-mBT10 / BIOS Operation 7.5.3 Security Feature Options Description Set Supervisor Password Set or clear the Supervisor account's password Enter Supervisor Hint String Press Enter to type Supervisor Hint String Min. password length Set the minimum number of characters for password (1-20) -
Page 79: Boot
COMe-mBT10 / BIOS Operation 7.5.4 Boot... -
Page 80: Exit
COMe-mBT10 / BIOS Operation 7.5.5 Exit Corporate Offices Europe, Middle East & Africa North America Asia Pacific Lise-Meitner-Straße 3-5 14118 Stowe Drive 17 Building,Block #1,ABP. 86156 Augsburg Poway, CA 92064-7147 188 Southern West 4th Ring Germany Beijing 100070, P.R.China Tel.: +49 (0) 821 4086-0 Tel.: +1 888 294 4558... - Page 81 Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln Telefon: +49 (0) 8191 91172-0 Telefon:...