Kia Soul EV 2018 Owner's Manual page 291

Hide thumbs Also See for Soul EV 2018:
Table of Contents

Advertisement

✽ ✽ NOTICE -
Using the iPod
Devices
• To use the audio system's iPod
control function, use the dedicated
cable provided with your iPod
• Connecting the iPod
®
to the vehi-
cle during play may result in a
loud noise that lasts about one to
two seconds. Connect the iPod
the vehicle after stopping or paus-
ing play.
• Connect the iPod
®
with the vehicle
in the ACC ON state to begin
charging.
• When connecting the iPod
be sure to fully push the cable into
the port.
• When EQ effects are enabled
simultaneously
on
®
devices, such as iPod
s and the
audio system, the EQ effects may
overlap, causing sound quality
deterioration
or
distortion.
Deactivate the EQ function for all
external devices, if possible.
• Noise may occur when your iPod
or the AUX port is connected.
Disconnect and store separately
when not in use.
(Continued)
(Continued)
®
• There may be noise if the audio
system is used with an iPod
®
AUX external device connected to
the power jack. In these cases, dis-
®
.
connect the iPod
device from the power jack.
• Play may be interrupted, or device
malfunctions may occur depend-
®
to
ing on the characteristics of your
®
iPod
/iPhone
• Play may fail if your iPhone
connected
®
Bluetooth
Wireless Technology
and USB. In this case, select Dock
®
cable,
connector or Bluetooth
Technology on your iPhone
change the sound output settings.
• If your software version does not
external
support the communication proto-
col or your iPod
due to device failure, anomalies or
defects, iPod
used.
®
• iPod
nano (5th generation)
devices may not be recognized if
®
the battery is low. Charge suffi-
ciently before use.
(Continued)
• The search and song play order in
®
or
the iPod
from the search order in the audio
system.
®
or external
• If the iPod
internal defect, please reset the
iPod
al).
• Depending on the software ver-
®
.
sion, the iPod
®
is
with the system. If the media is
through
both
removed or disconnected before
recognition, the previous mode
may not be restored (iPad
®
Wireless
be charged).
®
to
• Cables other than the 1-meter
cable provided with iPod
products may not be recognized.
• When other music apps are used
®
is not recognized
on your iPod
function may fail due to malfunc-
®
mode cannot be
tion of the iPod
(Continued)
Features of your vehicle
®
device may be different
®
has failed due to an
®
®
(consult your iPod
manu-
®
may fail to sync
®
cannot
®
/iPhone
®
, the system sync
®
application.
®
4 159

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents