1. Manuals
  2. Brands
  3. Sirman Manuals
  4. Mixer
  5. Ciclone W 200
  6. Instructions for use and maintenance manual

Sirman Ciclone W 200 Instructions For Use And Maintenance Manual

Professional hand-held mixer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
CHAP. 8 - DISPOSAL OF THE MACHINE
Professional Hand-Held Mixer
8.1 - DISINSTALLATION
If it has been decided to disinstall the machine for some reason, ensure that the
machine is unusable by anyone: detach and cut electrical connections.
W 200-280-360
8.2 - WEEE Waste of Electric and Electronic Equipment
Regular,
Directive 2002/95/EC, 2002/96/EC and 2003/108/EC on the restriction of the
Speed variator,
use of certain hazardous substances in electrical and electronic
equipment, and waste electrical and electronic equipment
This symbol, crossed out wheelie bin, on the product or on its packaging indicates that
this product must not be disposed of with your other household waste.
Separate waste collection of this appliance is organised and managed by the
manufacturer. It is the user's responsibility to contact the manufacturer and follow the
waste treatment system the manufacturer has adopted for separate waste collection.
The separate collection and recycling of your waste equipment at the time of disposal
will help to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment.
SERVICE CENTRE
AUTHORISED DEALER
Instructions for use and maintenance
28
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ciclone W 200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sirman Ciclone W 200

  • Page 1 CHAP. 8 - DISPOSAL OF THE MACHINE Professional Hand-Held Mixer 8.1 - DISINSTALLATION If it has been decided to disinstall the machine for some reason, ensure that the machine is unusable by anyone: detach and cut electrical connections. W 200-280-360 8.2 - WEEE Waste of Electric and Electronic Equipment Regular, Directive 2002/95/EC, 2002/96/EC and 2003/108/EC on the restriction of the...

  • Page 2: Table Of Contents

    INTRODUCTION CHAP. 7 - MAINTENANCE This manual has been written to supply the Customer with all the information  7.1 - GENERAL INFORMATION on the machine and the related safety rules, as well as the instructions for the Before carrying out any maintenance task, it is recommended to: receipt of the machine itself, cleaning, maintenance and disposal that allow to unplug the feeding cable from the net to insulate the machine from the rest of the use and maintain the means keeping its efficiency intact throughout the time.
  • Page 3 sharp parts. Hence, it is recommended to use protective gloves and to be ex- page 27 CHAP. 7 - MAINTENANCE tremely careful all the time. - GENERAL INFORMATION - DIPPING OF ACCIDENTAL FALL OF THE MACHINE - SHAFT AND WHIP FIXING Disassembly of the shaft (Fig.

  • Page 4: Chap. 1 - Receipt Of The Machine

    the special wall bearing (Fig. 58). CHAP. 1 - RECEIPT OF THE MACHINE The whips (Fig. 30- - ref. 19) can be washed even by the dishwasher. 1.1 - PACKAGING ENGINE’S BODY: unplug the feeding cable from the It is possible to request one of the following types of packaging for shipping our net to insulate the machine from the Hand Blender: electrical feeding completely (Fig.

  • Page 5: Box Check Upon Receipt

    ter and where necessary with the previously used detergent (Fig. 57). 5) Empty the container, rinse it and fill Do not leave the box exposed to hu- it with warm water. Let the machine midity and rain (Fig. 3). operate again for some more 10-15 seconds, if necessary repeat the op- Fig.

  • Page 6: Chap. 2 - Installation

    CHAP. 2 - INSTALLATION CHAP. 6 - REGULAR CLEANING 6.1 - GENERAL INFORMATION ATTENTION! The cleaning of the machine is an  operation to be done absolutely at All the tasks must be carried out by the end of every working cycle. trained members of staff (Fig.

  • Page 7: Placement

    at 2-3 cm from the whip’s body (Fig. accessories will be inside the suitcase 45). itself. The contents include (Fig. 11): Switch the machine (please see para- a) suitcase with punched protections graph 5.1) and move the shaft and (to be stored for future storing and the whip towards the inner part of the transportation) container with slow but regular revolv-...

  • Page 8: Electrical Connection

    bump the components one against 5.3 - MACHINE’S USE the other or cause them to fall must ATTENTION: be avoided). Check that the machine is perfectly The conditions will be the same even dry and that there is no dirt or hu- if no wall bearing has been ordered.

  • Page 9: Electrical Diagram

    electric plant of the building is 5.2 - USE’S FIELDS according to law. The dipping blender has been designed The dipping blender is supplied with a to blend, emulsify and whip fruit, vege- feeding cable with section 2x1 mm Fig. n°16 tables, meat, food in general.

  • Page 10: Chap. 3 - Machine's Information

    5.1 - CHAP. 3 - MACHINE’S INFORMATION PREPARATORY CHECK Check that the tools are perfectly as- sembled as per chapter 5. 3.1 - GENERAL PRECAUTIONS Even if these general precautions seem obvious, they are of paramount impor- Check that the electrical connections tance for the installation, the use, the maintenance and possible inconveniences has been done correctly as per para- and related remedies.
  • Page 11 Do not wash the blender by means  CHAP. 5 - USE OF THE MACHINE of the dishwasher or water jets (Fig. 22-23) ACCESSORIES ASSEMBLY: The dipping blender has been de-  signed to blend fruit, vegetables and The tools must be installed on the en- meat (unfrozen and without bones gine’s body when the machine is un- or stones) (Fig.
  • Page 12 Do not leave the dipping blender  4.4 - OVERALL DIMENSIONS, WEIGHT, FEATURES plugged in pointlessly. Unplug it when not using the machine. (Fig. ATTENTION: The electrical features of the machine are indicated by a plate placed by the grip Do not hang f handle the dipping (Fig.

  • Page 13: Chap. 4 - Getting Acquainted With The Machine

    Although the dipping blender is provided with the electrical and mechanical CHAP. 4 - GETTING ACQUAINTED WITH THE MACHINE measures (operating during the working phase and during cleaning and main- tenance) as per the enforcing laws, there are some RESIDUAL RISKS that The dipping blender is made up by more elements than the ones that in this cannot be eliminated completed.

  • Page 14: In-Built Safety Devices

    4.2 - IN-BUILT SAFETY DEVICES Dipping blender Engine’s body 4.2.1 - Mechanical safety devices As far as mechanical-nature safety, the dipping blender described by this man- ual complies to: Aspiration Escape grill the EC 2006/42 machine’s directives grill air The dipping blender is provided with: Whip-protecting bell (Fig.

This manual is also suitable for:

Ciclone w 280Ciclone w 360

Table of Contents