Ap Bridge - Point To Multipoint Mode - Planet Network Device WAP-4033PE User Manual

to configure the detail settings.
After configuration complete, please click "Apply" button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press "Continue" for
configure other settings or "Apply" to restart WAP-4033PE with new configuration.
3.2.5

AP Bridge - Point to Multipoint Mode

This function provides to bridge more than 2 wired Ethernet networks together by wireless
connection. You can use more than two WAP-4033PE with this mode to connect those wired
Ethernet networks together.
Parameter Description
Mode Shows the current operation mode. You may set WAP-4033PE to other operating
mode by select other operating mode.
Band 2.4GHz (B): It allows to select the transmit rate up to 11Mbps.
2.4GHz (G): It allows to select the transmit rate up to 54Mbps.
2.4GHz (B+G): It provides best performance for 11g transmission when you enable
the AP mode selection to "Mixed mode".
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
18