Quick Installation Guide This manual provides instructions for quick installation and basic configuration of your IP device. Step1. Connect cables to IP device Connect required cables to the device including the power cable, LAN cable, and other optional cables. To see the correct positions of all connectors, refer to the following image below. A.
Page 2
Step2. Install IP device 1) Drill holes in correct positions and insert anchor blocks into the holes. 2) Place the camera body to the installation surface and match alignment holes with the anchor blocks. Then tighten the surface anchor studs. 3) Connect all the required cables to the camera.
Page 3
Step4. View video on web page View the live video on a web page using your IP device and its IP address. Open a web browser and enter the IP address of the device. When the login page appears, Download and Install the ActiveX. Once the ActiveX is installed, enter the user name and password.
1. Click Setup on the upper right of the web page. 2. Click Network Setup on the left of the Setup page, and then select LAN from the drop-down menu. 3. Input the data for the IP address configuration, and click the Apply button on the bottom of the page.