Advertisement
*
*
4.2 Interface Instruction
4.2.1 Description of Main Interface
After turning on the power switch, the device is started and it enters the following main interface. In this
interface, various operations as shown in the following chart are available.
Audio
Selection
Full partition
sound source
settings
(1) Player Interface
In the following interface, the list box on the left is the directory list of built-in player and the list of songs
under this directory. Through the operating buttons of MP3, the operations of Play, Stop, Previous Song, Next
Song and Playback modes can be available. On the right of the interface, it is the audio interface. It can achieve
the multi-channel operations of automatically searching and playing the channel, playing the previous
channel/next channel, playing the specified channel, collecting the channels, etc.
After the area operation on the screen, click the
button to restore the partition state to the state
before the operation. Note: If the whole
operation after a single partition operation, it
will not be restored.
Switch of the
whole area
Main Interface Chart
Volume control of
the whole area
7
TABLE OF CONTENTS
Zone
switch
Slide the scroll bar
to
control
volume
You can click this
option to control
the volume. Each
click will increase
the volume of five
numbers.
Automatic (allows
timing reminder) /
manual
(timing
reminder off)
the
Advertisement
