Page 1
Type: EMW302WF APP Downloading & Installing Enter App Store or Google Play, download and install G-Homa app. You can also click the link on G-Homa website - Support page to download. APP User Registration After installing the G-Homa app, use a...
Page 2
C - Add New Device by Manual Mode (AP: Access Point) IOS system (Step 1): Go to home page of smartphone: IOS system (Step 2): Back to G-Homa App, click ‘Connected to G-Homa’, choose the WiFi that you can connect, enter the password to connect.
Personalize Your Device A - User can change device name and device image accordingly. Notice: System present device name: 101, 102... (e.g. Indoor series), 201, 202... (e.g. Outdoor series)... B - Add Timer / Delete Timer: Slide to left C - Alert message D - Firmware update E - Report If you met problems when using...
F - Delete device Max. ON Time Setting When this function is activated, the device will stay ON status no more than Max. ON hours. Countdown Setting Group Setting A - Add a New Group...
The devices in the same group are in the same setting. C - Change Device D - Delete Group General Setting A - Change Password / Delete Account B - Notification Setting Alert message can be sent to G-Homa App or Registered Email.
Page 6
Energy Monitoring Setting (EMW302WF-CTL ONLY) If you have an energy monitoring device, you can click the energy monitoring icon to enter the interface. You can set the fixed tariff or peak-valley tariff by clicking the button. To set the tarriff amount please click on the icon next to the technical data.
Page 7
Sound Detector (EMW302WF-SD ONLY) A - Function Test & Notification Volume up the sound of thesmartphone. Go near to the Sound Detector!Once the device is activated, notification will be pushed. B - Reset Flashing Alarm Icon Home Security (EMW302WF-HS ONLY) Notice: Up to 10 sensor devices can be added under a main device.
Page 8
B - Add Timer (When to alarm/disalarm) C - Reset Flashing Alarm Icon Linkage Setting A - Add a New Linkage (If/Then Settings) B - Linkage “IF” Setting Notice: In terms of conditions below, green means ‘And’, orange means ‘Or’, but they must be in the same color.
Page 9
C - Linkage “Then” Setting D - Delete Linkage...
Need help?
Do you have a question about the EMW302WF and is the answer not in the manual?
Questions and answers