Basics - Kenwood KDC-X302 Instruction Manual

BASICS

Faceplate
Loading
Volume
slot
knob
Detach button Flashes when the unit enters searching status. *
Detach
Attach
To
Turn on the power
Adjust the volume
Select a source
Change the display information*
* 1
Only for /
* 2
For : The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
* 3
For : You can also turn off the display information by pressing DISP repeatedly.
Display window
How to reset
On the faceplate
Press .
• Press and hold to turn off the power. *
Turn the volume knob.
Press repeatedly.
3 Press DISP repeatedly. ( 34, 35)
/ / /
Remote control (RC-406)
Lights up when
Bluetooth
connection is
established. * 1
( 17)
Can be remotely controlled with an optionally purchased
remote control.
1
functions are not available.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
2 ( Pressing SRC does not turn on the power. )
Press
• Press and hold
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
.
(supplied for
Remote sensor (Do not expose to bright
sunlight.)
Pull out the insulation sheet
when using for the first time.
/ /
/ /
or .
to continuously increase the volume to 15.
)
/ :
: Remote control
3
ENGLISH