NoxBox NOxBOXi Operating Instructions Manual page 2

®
NOxBOX & NOxMixer
i
1
Engage trolley brakes to
stabilise system prior to use.
5
Once zero test is complete,
follow instructions on screen
to set-up system.
Experienced users may
choose to skip directly to
system tests or skip to dose.
2
Operating Instructions
2
Carefully attach monitor
to trolley and fully tighten
clamp.
6
System test circuit set-up:
NOxFlow arrow points in
TM
direction of flow. 1m vent
tubing between sample
point and NOxFlow .
TM
3
Connect power supply to
suitable rated mains outlet.
7
Perform system
test to ensure correct system
functionality prior to
connecting to patient.
Setup
4
Press power button to start
system.
8
Connect to patient circuit;
sample near patient Y-piece.
Retain NOxFlow TM
orientation for flow and 1m
distance from sample point.
www.noxboxltd.com