Related Manuals for uAttend CB1000
Summary of Contents for uAttend CB1000
- Page 1 CB1000 Quick-Start Guide Contents 1. Getting Started – Signup 2. Timeclock Setup 3. Departments and Employees 4. Troubleshooting 5. Device Installation Page 1 of 7...
- Page 2 Step 2: You’ll be prompted to enter the DEALER ID. This can be found on the outside of the box the CB1000 came in. (It will be a sticker on the outside of the box - If missing, please contact us at: support@trackmytime.co.uk) Step 3: After entering the dealer ID, you will be prompted to select a plan that best fits your needs.
- Page 3 2. Time Clock Setup Before we begin linking your time clock to uAttend’s trackmytime.co.uk, you’ll need to ensure that the CB1000 is plugged into a power outlet and connected to your local area network using the included network cable (or one you provide).
- Page 4 3. Departments and Employees Before using your CB1000 time clock, we’ll need to set up at least one department and one employee. There is no limit to the number of departments you setup - however, the number of employees will correspond to the plan you selected.
-
Page 5: Troubleshooting
4. Troubleshooting Error Message Notes CLOCK ID ERROR This error is displayed when the CB1000 time clock has not been activated on an uAttend account. Please refer to Page #2 of this guide. Net Not Found The CB1000 was unable to contact the uAttend service. -
Page 6: Mounting Instructions
Step 1: Either attach the wall plate to the wall using the holes and screws provided, or, Fig 1 & Fig 2, attach the wall plate to the back of the CB1000 using the 4 small screws first and then install the screws as per Fig 3. - Page 7 Ensure the screws are installed at the correct distance apart, see Fig 3. Fig. 3 89mm Step 3: If appropriate, attach the CB1000 to the wall screws. Plug in the Ethernet cable and power adaptor Fig 4. Fig. 4 Page 7 of 7...
Need help?
Do you have a question about the CB1000 and is the answer not in the manual?
Questions and answers