Philips 21PV385 Service Manual page 96

STEP START-
/LOC. ING
No. No.
Loading Arm (SP)
[32] [25]
Assembly
Loading Arm (TU)
[32]
[33]
Assembly
[34] [2],[25] M Brake (TU) Assembly
[35] [2],[25] M Brake (SP) Assembly
[36] [35] Tension Lever Assembly
[37] [36] T Lever Holder
[38] [34] Reel (TU)(D2)
[39] [38] M Gear
[40] [36] Reel (SP)(D2)
Moving Guide S
[41] [32],[36]
Preparation
Moving Guide T
[42] [33]
Preparation
[43] [19] TG Post Assembly
[44] [28] Rack Assembly
[45] [44] F Door Opener
[46] [46] Cleaner Assembly
[47] [46] CL Post
↓ ↓
(1) (2)
(1): Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as identification (location) No. of parts in the figures.
(2): Indicates the part to start disassembling with in order to disassemble the part in column (1).
(3): Name of the part
(4): Location of the part: T=Top B=Bottom R=Right L=Left
(5): Figure Number
(6): Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
(7): Adjustment Information for Installation
(+):Refer to Deck Exploded Views for lubrication.
PART
Fig. No.
B DM2, DM14
B DM2, DM14
T DM1, DM15
T DM1, DM15
T DM1, DM15
T DM15
T DM1, DM15
T DM1, DM15
T DM1, DM15
T DM1, DM16
T DM1, DM16
T DM1, DM16
R DM17
R DM17
T DM1, DM6
T DM6
↓ ↓
(3) (4)
REMOVAL
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
*(P-7), Brake Belt
*(P-8)
*(L-12)
*(L-13)
*(P-9)
*(L-14)
↓ ↓
(5) (6)
2-4-2
INSTALLATION
ADJUSTMENT
CONDITION
(+)Refer to Alignment
Sec.Page 2-5-1
(+)Refer to Alignment
Sec.Page 2-5-1
(+)Refer to Alignment
Sec.Page 2-5-1
↓
(7)
Z13PDA