K-EIKO EGA100 Operator's Manual

Hide thumbs

Table of Contents

Quick Links

Download this manual

INDUSTRIAL POWER TOOLS

100mm (4")

115mm (4

125mm (5")

MODEL EGA100

• Compact body

• Convenient spindle lock

• Powerful motor

• Easy-to-use slide switch

OPERATOR'S MANUAL

Please retain this information for future reference

Disc Grinder

EGA115

EGA125

WARNING: THE SAFETY INFORMATION

GIVEN INSIDE MUST BE READ AND

UNDERSTOOD BY ANY PERSON

USING, INSTALLING, REPAIRING

OR MAINTAINING THESE

TOOLS.

Table of Contents

Need help?

Do you have a question about the EGA100 and is the answer not in the manual?

Questions and answers

Summary of Contents for K-EIKO EGA100

Page 1 INDUSTRIAL POWER TOOLS 100mm (4") Disc Grinder 115mm (4 ") 125mm (5") MODEL EGA100 EGA115 EGA125 • Compact body • Convenient spindle lock • Powerful motor • Easy-to-use slide switch WARNING: THE SAFETY INFORMATION GIVEN INSIDE MUST BE READ AND...
Page 2 Symbols 3) Personal safety The following show symbols used for the machine. Be a) Stay alert, watch what you are doing and use sure that you understand their meaning before use. common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
Page 3 8. Do not use of separate reducing bushings or adapters reach of children and infirm persons. to adapt large hole abrasive wheels. 9. The wheel continues to rotate after the tool is switched off. SPECIFICATIONS Model EGA100 EGA115 EGA125 Voltage (by areas) 110V, 230V Power Input* 650 W...
Page 4 For tools intended to be fitted with threaded hole CAUTIONS wheel, ensure that the thread in the wheel is long Check that the work piece is properly supported. enough to accept the spindle length. Ensure that ventilation openings are kept clear when Do not use cutting off wheel for side grinding.
Page 5 6. Service parts list CAUTION Repair, modification and inspection of K-EIKO Power Tools must be carried out by a K-EIKO Authorized Service Center. This Parts List will be helpful if presented with the tool to the K-EIKO Authorized Service Center when Only for EU countries requesting repair or other maintenance.
Page 8 EC DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with standards or standardized documents EN60745, EN55014 and EN61000-3 in accordance with Council Directives 73/23/EEC, 89/336/EEC and 98/37/EC. Manufactured for KENNEDY TOOLS Wigston Works, Leicester, England. ISO 9002 REGISTERED COMPANY Signed: Date: 30 November 2006...

This manual is also suitable for:

Ega125Ega115