Subscribe to Our Youtube Channel
Related Manuals for Chicony Electronics KT-1063
Summary of Contents for Chicony Electronics KT-1063
- Page 1 Chicony Standard Bluetooth Keyboard Users Manual Model No.: KT-1063 Issue: Jan. 03, 2011...
- Page 2 Scope Getting Start Thank you for choosing this ultrathin keyboard with Bluetooth technology to ensure no hinder communication between the keyboard and your computer without connecting cable. The transmission and receiving of keyboard are free from angle restriction. It can be used with IBM PC compatible computers pre-installed with the Windows 7, Windows Vista or Windows XP operating system.
- Page 3 Hot Keys...
- Page 4 Status light indicator Battery Status Led Battery low : Red LED brighten 0.5s,and waiting 5sec Connect Status Led Power ON : Blue LED brighten 5sec Pairing ： Blue LED flash 0.5s/0.5s (3min) Searching: Blue LED brighten 5sec continued to success Charging: Green LED turn on Charging full: Green LED turn off Before Use...
- Page 5 Configuring the Keyboard Configuring Steps Operation of the Bluetooth software may vary depending on your personal computer/device. For details, refer to the manuals provided with your personal computer. The setup instructions are based on your operating system. Case A: Click (Start), then “Control Panel.” Case B: Click the “Hardware and Sound”...
- Page 6 Here is an example for Bluetooth keyboard configuration to Windows Vista and Windows 7. Step 1: Click the “Bluetooth Devices” icon choose “Add a Device”. Step 2: In “Select a device to add to this computer” window choose “Bluetooth Keyboard” “Next”...
- Page 7 Step 4: When “This device has been successfully added to this computer” window displayed, you can start use this Bluetooth Keyboard. Disconnecting Turn off the mouse. Reconnection Turn on the mouse, and then reconnect. Note It may take time to reconnect after turning off the mouse. Troubleshooting and Tips The keyboard does not operate following installation or is not recognized.
- Page 8 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the KT-1063 and is the answer not in the manual?
Questions and answers