Advertisement
Quick Links
Advertisement
Summary of Contents for Rachio 16RACHBX
- Page 1 Enclosure Install Guide www.rachio.com/support...
- Page 2 CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. Do not use the white controller cover when using a Rachio outdoor enclosure.
-
Page 3: Need Help
What’s in the box? Need help? We have a team of experts ready to help. If you run into any problems, please contact Rachio customer support. 1 (844) 4-RACHIO bolts Complete support documentation, videos and more are available on our support site. - Page 4 What you’ll need... phillips screwdriver wire strippers drill and drill bit hammer (for drywall installs) pliers electrical tape...
-
Page 5: Easy Install
Download Download the Rachio app at www.rachio.com/download. Easy Install Create a Rachio user account to set up and manage your controller. You’ll need to create a username and password to connect your controller. 6 Quick Steps... - Page 6 Snap a few pictures. The Rachio app will guide you through connecting your Open the old controller. Use your phone to take a few controller to Wi-Fi.
- Page 7 ELECTRICAL QUESTIONS. intend to use. Remember to account for existing conduit (if present), as the Rachio enclosure might need to be Remove your old controller. mounted off center from the old controller.
- Page 8 Mount (continued) Bottom of Enclosure Interior of Enclosure...
- Page 9 The enclosure is designed with an internal outlet to use Drill pilot holes at the marked locations. the power adapter included with the Rachio controller. Rachio recommends hardwiring the enclosure. Note: The pilot holes should be approximately the same size as your anchor.
- Page 10 (hot) to black, and green (ground) wire to the bare copper wire from the junction box. Twist the wire from the supply side and the Rachio enclosure together in a clockwise direction using a connector cap. Wrap all wire connections with electrical tape for Hardwiring Bay a secure connection.
-
Page 11: Mount Controller
Mount Controller Wire it up. Push wiring into wiring bay. Connect the zone wires to Plug the power adaptor into the internal outlet of the the corresponding terminal locations. Reference photos of enclosure. Feed the sprinkler your previous wiring. Finally, wires through the bottom right hole of the enclosure, and pull plug the power adaptor into... - Page 12 ©2017 Rachio, Inc.