Page 1: Table Of Contents
Introduction Gg03 overview Getting started 6-13 Using your headset 17-22 Using your headset with multiple Bluetooth devices 23-27 Function / Button matrix 28-29 LED indicator chart 30-31 Audio indicator chart Additional information 33-38 Declaration of conformity 39-41 Regulatory information 41-42...
Page 2: Introduction
Introduction lntroduction Handle incoming and outgoing calls. Your Bluetooth headset Gg03 is a portable headset solution based on Bluetooth wireless technology. Adjust the volume. Please read the "Additional Information” before using your headset. Mute the microphone. What is Bluetooth wireless technology? Voice dialing (if your phone supports this function).
Page 3: Gg03 Overview
Gg03 overview Gg03 overview...
Page 4 Gg03 overview 5. Speaker 1.Indicator LED Plays the sound you receive on the call or the audio indicators (please refer There are 3 colors(blue/red/purple) to show the status of your headset. to the audio indicator chart). 2.Multifunction button To answer, end, reject a call and control advance functions by constituting with 6.
Page 5: Getting Started
It takes 90-120 minutes to fully charge the battery. Do not charge your headset for more than 1 day. The talk time of Gg03 is about 8 hours, and the standby time is about 220 hours.
Page 6 Getting started To charge your headset 1. Make sure the earhook forms an angle of 90˚. 2.Secure the bottom of the headset on the cradle.
Page 7 Getting started 3.Press the tip of the earpiece firmly towards the cradle until you hear a click sound. 5. It takes 90-120 minutes to fully recharge the battery. Red indicator is off. 4.You will see the red light when the headset is properly charging. 6.
Page 8 Getting started Gg03a Gg03v...
Page 9 Getting started Pairing Gg03a / Gg03v Power on your headset 1.Plug the USB charging cable into the charging port of the headset. 2.Plug the other end of the USB charging cable into the PC's USB port, charging adapter or Long press the MFB , then you will hear a power on melody and the blue indicator will quickly car charger.
Page 10 Getting started to the LED indicator chart). Power off your headset 2. Perform a "Bluetooth device discovery" from the mobile phone. Long press the MFB , then you will hear a power off melody and the red indicator will quickly flash twice. 3.
Page 11: Using Your Headset
Using your headset Using your headset 3. Short press the MFB on your headset. It may take a while to set up the Bluetooth After you have paired your headset with your phone, you can make and receive a call using your connection if the Bluetooth connection is down.
Page 12 Using your headset To reject a call Note: 1. Make sure your phone support Handsfree profile. If your phone rings first, wait until your headset rings, then short press the MFB. Your phone takes 2. When your headset rings, long press the MFB until you hear a long beep.
Page 13 Using your headset Note: Note: To do audio transfer from your headset to your phone, please short press the MFB For safety reasons, do not always adjust the listening volume to the maximum setting. Volume down button at the same time. To mute the microphone Release the Bluetooth connection 1.
Page 14: Using Your Headset With Multiple Bluetooth Devices
Headset profile or Handsfree profile. You do not need to buy 3 Bluetooth headsets when you using 3 4. When prompted by your phone, enter the passkey “1234” and your headset will confirm to Bluetooth mobile phones, just one Gg03/Gg03a/Gg03v could meet your requirement. Please refer the pair successfully with a pairing success melody.
Page 15 Using your headset with multiple Bluetooth devices current pairings. your headset takes time to set up the Bluetooth connection with the n'th phone. If you hear 1. Short press and release all the three buttons on your headset and the duration is less than 1 the ring tone from your headset, just short press MFB again to answer this call.
Page 16: Function / Button Matrix
Function / Button matrix connection is down. Function / Button matrix 4. After you hear a beep, voice dial as you normal would. Function Button 5. To cancel the voice dialing or end the call by short pressing the MFB long press for 3 seconds Power on/off To redial the last call...
Page 17: Led Indicator Chart
LED Indicator chart LED indicator chart Function Button Last call redial using the current connected phone when connected Headset State LED Indication long press for 3 seconds Last call redial using the first paired phone when not connected Power off Red indicator blinks twice Reject a call long press for 3 seconds...
Page 18: Audio Indicator Chart
Bluetooth connection between your headset and your phone when in sniff mode, Incoming call Mobile phone ring tone or Gg03 default ring tone depends on so do not spend time to set up a Bluetooth connection when need.
Page 19: Additional Information
Additional information Do not attempt do disassemble your headset. your headset does not contain consumer Additional information serviceable or replaceable components. Only G.G. Telecom service partners should perform Product care service. Please check for any exceptions, due to national requirements or limitations, in usage of Bluetooth Do not place your headset in extreme hot or cold temperature.
Page 20 Weight of headset Gg03:21g / Gg03a:13g / Gg03v:21g environment where metal powders, grain, dust are contained in the air. Standby time Gg03:220 hours / Gg03a:150 hours / Gg03v:220 hours Power supply Talk time Gg03:8 hours / Gg03a:5.5hours / Gg03v:8hours Do not wear your headset when charging.
Page 21 Additional information Battery information The AC power adapter is designed for indoor use only, and must not be used outdoors. If the plug will not fit into the outlet, asking help from a qualified electrician. Improper connection The rechargeable battery of your headset is not fully charged when it is new. For first time, can result in risk of electric shock.
Page 22: Declaration Of Conformity
Declaration of conformity Declaration of conformity pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable FCC statement protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in This device complies with Part 15 of the FCC Rules.
Page 23: Regulatory Information
Regulatory information responsible for compliance could void your authority to operate the equipment. FCC RF radiation exposure statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or This manual is published by G.G. Telecom, without any warranty. The information contained in this transmitter.