Der Kleber ist für den Innen- und Außenbereich geeignet, da er von -40°C ~ +100°C temperaturstabil ist, er bietet sofortige und hohe Festigkeit. Weiterhin ist er lösungsmit- telfrei und wärmebeständig, da erst bei 130°C wieder ablösbar. Das Modell WZ HK 11-WL kann kabellos oder mit Netzkabel betrieben werden. 2 Bestimmungsgemäßer Gebrauch: Ihre Fixpoint Heißklebepistole ist nur für die in Kapitel 1 genannten Klebeanwendungen im...
Betriebs. • Stellen Sie das Gerät nur auf brandfeste, nicht wärmeleitende und stabile Unterlagen. Das Modell WZ HK 11-WL muss in die dafür vorgesehene Heizstation abgestellt werden. • Ziehen Sie bei Nichtgebrauch und Gewitter das Netzkabel aus der Steckdose. •...
2. Verbinden Sie das Netzkabel mit der Klebepistole, wenn nötig und mit einer Steckdose. ACHTUNG! Die Heißklebepistolen heizen sofort auf! Das Netzkabel der WZ HK 11-WL können Sie auch mit der Heizstation und danach mit einer Steckdose für den Schnurlosbetrieb verbinden.
Prüfen Sie, ob das Gerät an einer funktionsfähi- gen Steckdose angeschlossen ist. Kontrollieren Sie, ob das Gerät fest in der Heiz- station sitzt (nur WZ HK 11-WL). Die Klebesticks bewegen sich nur schwer. Prüfen Sie anhand Kapitel 11, ob 7,2mm oder 11mm Klebesticks verwendet werden.
WEEE Richtlinie: 2012/19/EU WEEE Nr.: 82898622 13 CE-Konformitätserklärung: Dieses Gerät entspricht den EU-Richtlinien 2004/108/EG und 2006/95/EG: Mit dem CE Zeichen erklärt Fixpoint , eine registrierte Marke der Wentronic ® GmbH, dass das Gerät die grundlegenden Anforderungen und Richtlinien der europäischen Bestimmungen erfüllt. Diese können online auf www.wentronic.com angefor- dert werden.
The glue is made for interior and exterior use because it is stabil at temperatures from -40°C to +100°C. It offers fast and high fixity. Furthermore it is solvent free and thermally stable, because removable not under 130°C. Model WZ HK 11-WL is operatable wireless or with mains cable. 2 Intended Use: Your Fixpoint - glue gun is provided for using like described in chapter 1.
• Only place the product on fire resistant, not heat conducting and solid surfaces. Place model WZ HK 11-WL only on the heating station. • Unplug the mains plug during thunder storms.
3. After a heating-up time of around 10 minutes, the glue gun is ready to use. Model WZ HK 11-WL then is ready to operate for around 5 minutes and has to be charged again in the heating station.
Check the connection to an operating mains socket. Check if the device is correctly plugged in the heating station (only WZ HK 11-WL). The glue sticks move very hardly. Make sure of using the right glue stick diameter of 7.2mm or 11mm by reading chapter 11.
WEEE No: 82898622 13 CE Declaration: This device corresponds to EU directives 2004/108/EC and 2006/95/EC: With the CE sign Fixpoint , a registered brand of the Wentronic GmbH ensures, that ® the product is conformed to the basic standards and directives. These standards can be found online on www.wentronic.com.
Page 16
Revision Date: 2012-11-19 Version 2 Fixpoint is a registered ® trademark of Wentronic GmbH in Germany and/or other countries. Wentronic GmbH Pillmannstraße 12 38112 Braunschweig, Germany Designed and Developed in Germany. Assembled in China...
Need help?
Do you have a question about the WZ HK 11 and is the answer not in the manual?
Questions and answers