Page 2
). The information is subject to change without notice and should not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions of this document or new editions of it may be issued to incorporate such changes.
The Mitel Unit Quick Start............1 Using IPv4 to Connect the Mitel Unit to a Network with a DHCP ......1 Using IPv4 to Connect the Mitel Unit to a Network without a DHCP .
7. Validate the installation. 8. Turn ON the AC power sources that are used to power the Mitel unit at the circuit breaker NOTE: When the unit is brought from a cold to a warm environment, condensation, that might be harmful to the unit, may occur.
7. Validate the installation. 8. Turn ON the AC power sources that are used to power the Mitel unit at the circuit breaker. NOTE: When the unit is brought from a cold to a warm environment, condensation, that might be harmful to the unit, may occur.
The Mitel Unit Quick Start NOTE: You can also use admin as a username and administrator as password. 3. Click Login. Result: The Information page of the Management Interface is displayed. Changing the Login Password For security reasons, it is a best practice to change the Login Password.