Install And Unload Battery; Charging - Daewoo SMD-5018a User Manual

Prompt: If the memory card is failed, please check whether it is correctly placed and good contact of metal point.

3 Install and Unload Battery

Take off the rear cover of the mobile.
Make one end of battery with metal surface aim at the battery connector.
Then gently press the battery downward using the finger, and then press the other end to install the battery.
Prompt: Please operate correctly to avoid damaging the battery connector.

4 Charging

4.1 Charger
Insert the charger on the charging interface at the top of the phone. After inserting the charging plug, battery strength
icon stripe at the top right corner of the screen is scrolling, which means that the charging is processing; when the stripe
is full of the whole icon and stop scrolling, which means that the battery charging is completed; when the charging is
completed, please pull out the plug.
When electric quantity is not enough, warning message will be sent; and electric quantity shows empty. When electric
quantity is too low, the phone will power off automatically. Please don't make the battery in the status of not enough
electric quantity for a long time; otherwise it may damage the battery quality and service life. Please don't charge the
battery for a long time.
Prompt: In order to ensure normal operation of the phone, please make sure to use the designated charger.
4.2 USB disk Identification
After USB disk is inserted, you can deal with data in USB disk after its light is on. Please refer to "File Manager" for
the usage of USB Disk.
:
Prompt It is forbidden to remove USB disk when data in USB disk is being copied, transferred or deleted to prevent
data damage.
4.3 Transferring Data With Computer
4.3.1 Install USB
7