Lexus 2003 SC430 Owner's Manual page 128

16st05
" 1 Front airbag sensors
2 Front seat belt pretensioner assembly
3 SRS warning light
4 Airbag sensor assembly
5 Occupant detection sensor
6 Seat belt buckle switch
The front seat belt pretensioner system mainly consists of the
above components, and their locations are shown in the
illustration.
The front seat belt pretensioners are controlled by the airbag
sensor assembly. The airbag sensor assembly consists of a
safing sensor and airbag sensor.
When the front seat belt pretensioners are activated, an
operating noise may be heard and a small amount of
smoke–like gas may be released. This gas is harmless and
does not indicate that a fire is occurring.
Once the front seat belt pretensioners have been activated, the
seat belt retractors remain locked.
Do not modify, remove, strike or open the front seat belt
pretensioner assemblies, airbag sensor or surrounding
area or wiring. Doing any of these may cause sudden
operation of the front seat belt pretensioners or disable
the system, which could result in death or serious
injury.
Failure to follow these instructions can result in death
or serious injury. Consult your Lexus dealer about any
repairs and modifications.
Do not perform any of the following changes without
consulting your Lexus dealer.
interfere with proper operation of the front seat belt
pretensioners in some cases.
D Installation of electronic devices such as a mobile
two–way radio, cassette tape player or compact disc
player.
D Repairs on or near the front seat belt retractor
assemblies.
D Modification of the suspension system.
D Modification of the front end structure.
D Attachment of a grille guard (bull bar, kangaroo bar,
etc.), snowplow, winches or any other equipment to
the front end.
2003 SC430 from May '03 Prod. (OM24449U)
COMFORT ADJUSTMENT
CAUTION
NOTICE
Such changes can
111