Acer Modemconte User Manual page 10

&T8
&U_ &U0
&U1
&V_ &V0
&V1
&W_ &W0 Stores the active profile as Configuration
&W1 Stores the active profile as Configuration
&Y_ &Y0
&Y1
&Zn=x n=0-3 Store telephone number x into non-volatile
%E_ %E0
%E1 V.22bis auto-retrain enabled
3.5 MNP/V.42/V.42bis Commands
%An n=0-
127
%C_ %C0
%C1 Enable MNP Class 5 data compression
%D_ %D0
%D1 1Kbyte dictionary
%D2 2 Kbyte dictionary
\C_ \C0
\C1
\C2
\G_ \G0
\G1
\N_ \N0
\N1
\N2
\N3
\N4
\N5
Perform Local Analog Loopback Test and
Self-Test
Enable Trellis Coding @ V.32
Disable Trellis Coding @ V.32
Displays Active and Stored Profile 0
Displays Active and Stored Profile 1
Profile 0
Profile 1
Configuration Profile 0 active upon Power
on or reset
Configuration Profile 1 active upon Power on
or reset
RAM
V.22bis auto-retrain disabled
Set auto-reliable fallback character to n (where
n = 0 to 127,ASCII). Requires the \C2 setting
Disable MNP Class 5 data compression
512 byte dictionary for V.42bis
Do not buffer data during LAPM/MNP
handshaking
Buffer all data for 4 seconds, until receiving
200 characters or until a packet is detected
Do not buffer data; switch to normal mode
when fallback character is detected
Disable DCE flow control
Enable DCE flow control
Normal data-link only
Direct data-link only
MNP data link only
MNP/Normal data link
V.42 data link only
V.42/Normal data link
9