Operation Manual / 4 Product description / A130-M.. - A145-M..
8
Dismantling and fitting
8.9
Removing the nozzle ring
Figure 41: Removing the nozzle ring
1. If present: Remove the metal C-ring (51105).
2. Position the fastening strips (51002) in place.
3. Pull out the nozzle ring (56001) with the two extraction devices (90070) and the service
support base (90012).
4. Remove the lamellar sealing ring (56005).
5. Remove the burst ring (57210).
© Copyright 2017 ABB. All rights reserved.
HZTL4031_EN
Page 89 / 121
Revision E
January 2017