EX16905 www.etherwan.com Quick Start Guide This quick start guide describes how to install and use the Gigabit Ethernet Switch. Capable of operating at temperature 0°C to +45°C, this is the switch of choice for environments constrained by space. Physical Description...
EX16905 www.etherwan.com State Indication Steady Power on. Power (Green) Power off. 10/100/1000Base-T A valid network connection established at Steady 10/100Mbps. Link/Act Transmitting or receiving data. (Green) Flashing Act stands for Activity. No Link. A valid network connection established at Steady 1000Mbps.
EX16905 www.etherwan.com 2. The 1000Base-SX/LX Connections The fiber port pinouts: The Tx (transmit) port of device I is connected to the Rx (receive) port of device II, and the Rx (receive) port of device I to the Tx (transmit) port of device II.
Page 4
EX16905 www.etherwan.com Supports IEEE802.3x Flow Control for Full-duplex & Back Pressure for Half-duplex. None-blocking architecture and full wire-speed forwarding rate. Supports 2048 MAC addresses. Supports IEEE802.1p Quality of Service (QoS). IEEE802.3az EEE (Energy Efficient Ethernet) supported on copper ports.
EX16905 www.etherwan.com Preface This switch addresses a need for a smaller switch. Capable of operating at temperature extremes of 0°C to 45°C, this is the switch of choice for environments constrained by space. Plug-and-Play Solution: The switch is a plug-and-play Gigabit Ethernet Switch in compact size.
EX16905 www.etherwan.com Table of Contents UICK TART UIDE HYSICAL ESCRIPTION The Port Status LEDs The 1000Base-T and 1000Base-SX/LX/BX Connectors UNCTIONAL ESCRIPTION REFACE ABLE OF ONTENTS RODUCT VERVIEW IGABIT THERNET WITCH ACKAGE ONTENTS RODUCT IGHLIGHTS Basic Features RONT ANEL ISPLAY HYSICAL...
EX16905 www.etherwan.com Product Overview Gigabit Ethernet Switch Package Contents When you unpack the product package, you shall find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller. ...
EX16905 www.etherwan.com Product Highlights Basic Features Supports IEEE802.3/802.3u/802.3ab/802.3z. Auto-negotiation: 10/100/1000Mbps, Full/Half-duplex. Auto MDI/MDIX. 1000Base-SX/LX: Multi mode and Single mode SC and ST type. 1000Base-BX: WDM Multi mode and Single mode SC type. SFP socket for Gigabit fiber optic expansion. Supports duplex LC connector on SFP with 1000Base-SX/LX/BX.
EX16905 www.etherwan.com Front Panel Display Power Status This LED comes on when the switch is properly connected to power and turned on. Port Status LEDs The LEDs display status for each respective port.
EX16905 www.etherwan.com State Indication Steady Power on. Power (Green) Power off. 10/100/1000Base-T A valid network connection established at Steady 10/100Mbps. Link/Act Transmitting or receiving data. (Green) Flashing Act stands for Activity. No Link. A valid network connection established at Steady 1000Mbps.
EX16905 www.etherwan.com Installation This chapter gives step-by-step instructions about how to install the switch: Selecting a Site for the Switch As with any electric device, you should place the switch where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: ...
EX16905 www.etherwan.com Connecting to Power Connect the supplied AC to DC adapter to the receptacle on the back of the switch, then plug the cord into a standard AC outlet with a voltage range from 100 to 240 VAC.
EX16905 www.etherwan.com Connecting to Your Network Cable Type & Length It is necessary to follow the cable specifications below when connecting the switch to your network. Use appropriate cables that meet your speed and cabling requirements. Cable Specifications Speed Connector...
EX16905 www.etherwan.com Cabling Step 1: First, ensure the power of the switch and end devices are turned off. Always ensure that the power is off before any installation. <Note> Step 2: Prepare cable with corresponding connectors for each type of port in use.
EX16905 www.etherwan.com Appendix A – Connector Pinouts Pin arrangement of RJ-45 connectors: RJ-45 Connector and Cable Pins The following table lists the pinout of 10/100/1000Base-TX ports. Ports TP0+ TP0- TP1+ TP2+ TP2- TP1- TP3+ TP3-...