Advertisement
Quick Links
SYNCROSET
DISTRIBUTOR
™
Installation and Operation Manual
Manufacturers of Innovative Materials Handling Equipment since 1957.
491 North Emerson Street * Cambridge MN 55008-1316 U.S.A.
Toll Free (800) 328-8002
FAX (763) 689-5310
Local / International (763) 689-5991 EMAIL sales@schlagel.com
www.schlagel.com
Advertisement
Summary of Contents for Schlagel SYNCROSET
-
Page 1: Installation And Operation Manual
SYNCROSET DISTRIBUTOR ™ Installation and Operation Manual Manufacturers of Innovative Materials Handling Equipment since 1957. 491 North Emerson Street * Cambridge MN 55008-1316 U.S.A. Toll Free (800) 328-8002 FAX (763) 689-5310 Local / International (763) 689-5991 EMAIL sales@schlagel.com www.schlagel.com... -
Page 2: Table Of Contents
8 ..Maintenance Schlagel, Inc. So that they will be readily available 9 ..Spout Removal for reference, all bulletins should be inserted with 10 . -
Page 3: Information Service
Farm and Industrial Purchased from: Equipment Institute (FIEI) and approved by the Write or Call: Schlagel, Inc. American Society of Automotive Engineers (ASAE) 491 North Emerson Street and others for the purpose of calling attention to... - Page 4 TABLE OF CONTENTS SECTION 2 - ASSEMBLY AND INSTALLATION INSTALLATION 1. The distributor has at least three (3) support bars 5. After the spouts have been connected and before protruding from the side of the housing depending the control cable has been run, operate the on the number of outlets supplied.
- Page 5 11. Run the cable from the foot pedal to the lift lever on the distributor in a similar manner. SYNCROSET DISTRIBUTOR PARTS LIST ITEM # DESCRIPTION SUPPORT BAR SPOUT LINER SPOUT...
-
Page 6: Typical Cable Run Layout
TABLE OF CONTENTS SECTION 2 - ASSEMBLY AND INSTALLATION TYPICAL CABLE RUN LAYOUT Assembly at distributor LIFT BAR PULLEYS (2) TO CONTROL WHEEL CLUSTER PULLEY CABLES BOTTOM VIEW Page... - Page 7 SECTION 2 - ASSEMBLY AND INSTALLATION SECTION 1 - GENERAL TYPICAL CABLE RUN LAYOUT Assembly at operator station WIRE CABLE (FIELD ROUTED) CONTROL WHEEL W/MOUNTING BRACKET SLIDE MOUNTING BRACKET ON WALL TO ADJUST THE CABLE TENSION. WIRE CABLE (FIELD ROUTED) MOUNTING SURFACES (TO BE FIELD LOCATED) FOOT PEDAL...
- Page 8 2. With the SyncroSet Distributor the operator does not have to be familiar with the “feel” of the distributor as the spout will roll into the duct with very little effort, and when the control wheel does not move the spout is set.
- Page 9 SECTION 3 - OPERATION AND MAINTENANCE TROUBLE SHOOTING MAINTENANCE 1. Under normal operating conditions the SyncroSet Distributor will not need attention as it is entirely PROBLEM #1 SPOUT TURNS HARD self cleaning. All that is necessary to keep the A-CAUSE: CONTROL CABLES TOO TIGHT.
- Page 10 SECTION 3 - OPERATION AND MAINTENANCE INNER SPOUT REMOVAL Manually Operated Distributors A. Open the door and rotate the inner spout to one side so that you have access through the door to where the center shaft connects to the stub pipe that is welded to the spout.
- Page 11 NOTES NOTES Page...
- Page 12 SyncroSet Distributor. 491 North Emerson Street • Cambridge MN 55008-1316 U.S.A. Toll Free (800) 328-8002 FAX (763) 689-5310 Local / International (763) 689-5991 EMAIL sales@schlagel.com www.schlagel.com ©2015 Schlagel Inc. 11/15 Rev. D Printed in U.S.A.
Need help?
Do you have a question about the SYNCROSET and is the answer not in the manual?
Questions and answers