Optional Accessories; Environment Sensors; Door Sensor - NRGence eco PDU PE series User Manual

Optional Accessories

Environment Sensors

For complete energy management of an instrumented data center with the use
of the eco PDU and eco Sensors software, you should install 4 sensors for each
of the racks in your data center in order to generate a complete energy-efficient
data chart. Higher sensor installation density is helpful to generate more
accurate data. 8/16-port models have 4 sensor ports. Higher sensor installation
density is helpful to generate more accurate data.
To get the most complete eco Sensors Dashboard data, the recommended 4-
sensor setup is show in the table, below:
Port
Sensor 1
Sensor 2
Sensor 3
Sensor 4

Door Sensor

All models in the PE7xxx/PE8xxx/PE9xxx range feature a 4-pin dry contact
port for door sensors that supports the monitoring of rackmount enclosure door
access to notify users when a door has been opened.
See the table below for information about the two available door sensors.
Please contact your ATEN dealer for purchasing information:
Port
Door Sensor
Sensor Management
Sensors can be managed via the eco PDU's built-in graphical user interface
(GUI) or with the NRGence eco Sensors software that can be downloaded from
the ATEN website. The download link can be found on the software CD
provided with the eco PDU package.
Location Part Number
Intake EA1140 or
EA1240
Intake
Exhaust
Exhaust
or Floor EA1340
Part Number
EA1440
EA1441
Chapter 1. Introduction
Sensor
Temperature or
Temperature / Humidity
Differential Pressure
Sensor
Photo Sensor
Inductive Proximity Sensor
8