Page 16 Thank you for purchasing this Cadence SQA Series amplifier. Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding, most powerful amplifiers on the market and of course at a reasonable price.You will be amazed at the quality and power that these new amps offer.
AMPLIFIER FEATURE DESCRIPTIONS SQA 600.1/SQA 1200.1 MONOBLOCK-D 1. Line Out: To audio Inputs of satellite amplifier(if present). 2. Line Input: These inputs are for signal cables. 3. Remote Bass Control: Remote controls the Volume level. 4. Input Level Control: Enables the matching of input levels to the output levels from the source. 5.
AMPLIFIER FEATURE DESCRIPTIONS SQA 250.2 2 CHANNEL 1. Line Out: To audio Inputs of satellite amplifier(if present). 2. Line Input: These inputs are for signal cables. 3. Remote Control: Remote controls the Volume level. 4. Input Level Control: Enables the matching of input levels to the output levels from the source. 5.
AMPLIFIER FEATURE DESCRIPTIONS SQA 500.4 4 CHANNEL 1. Line Out: To audio Inputs of satellite amplifier(if present). 2. Line Input: These inputs are for signal cables. 3. Input Mode: Switch 2 channel or 4 channel. 4. Remote Level Mode: Switch all or 3 & 4. 5.
AMPLIFIER FEATURE DESCRIPTIONS SQA 750.6 6 CHANNEL 1. Line Input: These inputs are for signal cables. 2. Line Mode: Switch 2 channel or 6 channel. 3. Inut Level Control: Enables the matching of input levels to the output levels from the source. 4.
SQA 500.4 4 CHANNEL AMPLIFIER APPLICATIONS BRIDGED MODE CHASSIS GROUND TO BATTERY +12V VIA FUSE REMOTE TURN-ON Input mode switch in CH 2 position MONO SUBWOOFERS 4-OHM EACH MINIMUM...
Page 12
SQA 500.4 4 CHANNEL AMPLIFIER APPLICATIONS 4 CHANNEL MODE CHASSIS GROUND TO BATTERY +12V VIA FUSE REMOTE TURN-ON FULL Input mode switch in CH 4 position RANGE SPEAKER 2-OHM EACH MINIMUM...
SQA 750.6 6 CHANNEL AMPLIFIER APPLICATIONS BRIDGED MODE CHASSIS GROUND REMOTE TURN-ON TO BATTERY +12V VIA FUSE Input mode switch in CH 2 position MONO SUBWOOFERS 4-OHM EACH MINIMUM...
Page 14
SQA 750.6 6 CHANNEL AMPLIFIER APPLICATIONS 6 CHANNEL MODE CHASSIS GROUND REMOTE TURN-ON TO BATTERY +12V VIA FUSE Input mode switch in CH 6 position FULL RANGE SPEAKER 2/4OHM EACH MINIMUM...
SQA SERIES AMIPLIFIER FEATURES SQA 1200.1 MODEL SQA 600.1 SQA 250.2 SQA 500.4 SQA 750.6 Output Power Rating RMS @ 4 OHM 240W x 1 450W x 1 80W x 2 80W x 4 80W x 6 RMS @ 2 OHM 420W x 1 800W x 1 120W x 2...
SQA 600.1/ SQA 1200.1/SQA250.2/SQA500.4/SQA750.6 AMPLIFIER APPLICATIONS General: At this point you are ready to get more specific on the settings for your amplifier. Subsonic: This setting acts as a low frequency cut off for your system bass reproduction. The point that you set it at cuts off any frequencies from reproduction beyond this point.
TROUBLESHOOTING Before removing your amplifier, refer to the list below and follow the suggested procedures. Always test the speakers and their wires first. AMPLIFIER WILL NOT POWER UP. Check for good ground connection. Check that remote DC terminal has at least 13.8v DC. Check that there is battery power on the + terminal.
Page 18
// Features and specifications subject to change and or improvement without notice. Though we tried our best to ensure that this manual is free and clear of errors please don’t hold us responsible for printing errors. // Copyright by Cadence Acoustics LTD. www.cadencesound.com...