iClever IC-BTH20 User Manual page 3

Switch on/off the headphones
Function Operation
Switch on Long press MFB button about 3s until
white indicator flashes for 1s
Switch off Long press MFB button about 4s and
the orange indicator flashes for 1s then
turns off
Note:
 When the headphones goes into standby mode, the white indicator will flash
twice every 5s (not paired with devices).
 In order to save power, the headphones will turn off automatically if no devices
are connected after 5 minutes.
Pairing/connecting
1) Keep your headphones turned off and within 1 meter of your phone.
2) Long press MFB button about 5s until the orange and white LED indicator lights
flash alternately to enter pairing mode, there will be voice prompt "Pairing".
3) Activate the Bluetooth function on your Bluetooth-enabled device and search for
Bluetooth headphones.
4) Select the headphones name IC-BTH20 from the list of Bluetooth devices found
by your Bluetooth-enabled device and then connect it (input pairing code 0000 if
needs).
5) When the headphones is being connected successfully, there will be voice prompt
"connected".
Notes:
 The headphones will directly enter pairing mode the first time you turn it on.
 It will automatically connect with the mobile phone or other devices that already
paired last time when you turn it on.
 If the pairing doesn't succeed, turn off the headphones and repeat the steps as
above to try again.
 When connecting to a smart or playing music, the white indicator light will flash
once every 7s.
Prompt Voice
"Power on" voice beeps
"Power off" voice beeps