Switching The Remote Control Command; Continuous Playback; The Automatic Switch-Off - Philips VR805/07 Operating Instructions Manual

How to switch to 16:9
You can only use this function, when the video recorder
(socket ) and the TV set are connected with a scart
AV1 EXT1
cable.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the button. The main menu appears.
MENU
c
Select the line 'SPECIAL SETTINGS' with the menu
buttons or and confirm with the
P = P ;
d
If you have a TV set in wide-screen format, select 'ON' in
line '16:9 WIDE SCREEN'. If not, select 'OFF' with the
menu buttons or
P
e
Confirm with the
OK
f
To end, press the
MENU

Switching the remote control command

If you have two video recorders with the same remote control
command, you can change the remote control command of the
handset and the remote control command of one of the video
recorders.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the button. The main menu appears.
MENU
c
Select the line 'SPECIAL SETTINGS' with the menu
buttons or and confirm with the menu button
P = P ;
P .
d
Select the line 'VCR 1 OR 2' with the menu buttons
P ; .
e
Select 'VCR 1' or 'VCR 2' with the menu buttons
P
f
Confirm with the
OK
g
On the remote control, press the
digit button at the same time to switch the remote
2
control to 'VCR 2'.
D If you want to switch back to 'VCR 1, press the
button and the digit button
h
Confirm with the
OK
16
button.
P
.
Q
button.
button.
button.
button and the
SELECT
SELECT
at the same time.
1
button.
D If the menu does not disappear, the video recorder didn't
recognize the remote control command. Repeat
g
step .
D After you changed the batteries in the remote control, it
will switch back to 'VCR 1'.
D If you entered the wrong remote control command, the
message e.g.: 'VCR ONLY RESPONDS TO VCR 1
COMMANDS' appears on the TV screen or 'VCR 1'
appears in the video recorder display, when you press a
button for a few seconds.

Continuous playback

a
Press the
b
Select the line 'SPECIAL SETTINGS' with the menu
buttons P =
c
Select the line 'REPEAT PLAY' with the menu buttons
or
P = P ;
d
Select 'ON' with the menu buttons
lect 'OFF', the function will be switched off.
e
Confirm with the
f
Press the
g
Insert a cassette and start the continuous playback with
the
PLAY G
When the end of the tape or the end of the recording has
been reached, it rewinds and starts playback again.

The automatic switch-off

P = or
If the video recorder is not used for a few minutes in certain
modes (e.g.: STOP), it switches to standby automatically. You
Q or
can switch off this automatic switch-off in order to use the
video recorder as a television receiver.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the
c
Select the line 'SPECIAL SETTINGS' with the menu
buttons P =
.
P
button. The main menu appears.
MENU
or P ; . Confirm with the menu buton
.
Q
button.
OK
button.
MENU
playback button.
button. The main menu appears.
MENU
or P ; and confirm with the menu button
P .
or P . If you se-