Advertisement
Advertisement
Table of Contents
Related Manuals for Erisan AnyCast EZM2
Summary of Contents for Erisan AnyCast EZM2
- Page 1 Quick Instruction for ERISAN AnyCast Any questions, please email: support@erisanhome.com The EZM2 has two modes for Wi-Fi connection, one is the Miracast for Android, the other is the DLNA for iOS(like iPhone, iPad or Macbook) Please press the "Fn" button to enter in the correct mode.
- Page 2 Miracast: for Android（PSK：xxxxxxxx, the numbers“xxxxxxxx” is the password） DLNA: for iOS devices.（PSK：xxxxxxxx, the numbers“xxxxxxxx” is the password）...
- Page 3 Part 1. Instruction For android device(Press the FN button to enter in the Miracast mode): Please plug the EZM2 Wi-Fi device in the HDMI port & 5V USB ports of the projector/TV, then power on the projector/TV and select the input signal as HDMI, it will show the booting screen. Notice: Android device Must support Miracast, please check the settings of android phone/tablet to use “Smart View”/ "Wireless Display"...
- Page 4 Part 2. Instruction For iOS device(Press the FN button to enter in the DLNA mode): Please plug the EZM2 Wi-Fi device in the HDMI port & 5V USB ports of the projector/TV, then power on the projector/TV and select the input signal as HDMI, it will show the booting screen. Mode: DLNA, PSK：xxxxxxxx, the numbers“xxxxxxxx”...
- Page 5 Go back to Setting of your iPhone/iPad, In the WLAN, please click the WiFi named like "Anycast-xxxxxx" again. Slide upward from the bottom of iPhone/iPad to display the hidden menu, please click "Airplay Mirroring". Then please click "Anycast-xxxxxx".
- Page 6 Part 3. Instruction For Windows(Press the FN button to enter in the Miracast mode) Notice: Only support Windows® 10 Operating system with a 4th Generation (or newer) processor. Does Not support Windows 7 and Windows 8. For Windows, Please check the Compatibility, GO to www.intel.com & Search 000021494 If Windows PC/Laptop/Tablet does not have the Inter WIDI feature, please use the third-party Software“AirParrot”to connect.
- Page 7 You can set the Default Booting Mode in AirSetup, here is how: 1. Press Fn button to enter in DLNA mode. 2. In Wi-Fi of Android/iOS, connect to “Anycast-xxxxxx", （PSK： xxxxxxxx, the numbers“xxxxxxxx” is the password）. 3. After connected, open the web browser of your iOS/Android (like Safari or Chrome), input the IP: “192.168.203.1”, you can set the default booting mode by clicking the option "Default Mode".
Need help?
Do you have a question about the AnyCast EZM2 and is the answer not in the manual?
Questions and answers