CHD Elektroservis JU6-KBD Installation Manual

Midi interface for roland juno-6 keyboard

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Model 8-429

ver. 1.0

INSTALLATION MANUAL

Table of Contents

Need help?

Do you have a question about the JU6-KBD and is the answer not in the manual?

Questions and answers

Summary of Contents for CHD Elektroservis JU6-KBD

Page 2: Table Of Contents
Manufacturer : CHD Elektroservis Nad kundratkou 27, 19000 Praha 9 Czech Republic info@chd-el.cz www.chd-el.cz Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Page 3: Introduction
MIDI interface! Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Page 4: Installation Of Midi Interface
Carefully open the instrument - lift off the instrument’s front panel (pic. 2.1-2). Instrument’s main board is located at right side inside the instrument. Pic. 2.1-1 Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Page 5: Midi-In Connector Installation
(see pic. 2.2-2). Pic. 2.2-1 Pic. 2.2-2 Pic. 2.2-3 Pic. 2.2-4 Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Page 6 It is suitable to mark the connector („MIDI IN“) use e.g. self-adhesive foil (pic. 2.2-2). Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Page 7: Bunched Cables Montage
(pic. 2.3-2). The bunched cables are placed along the instrument's keyboard as shown on picture 2.3-3 Pic. 2.3-1 Pic. 2.3-2 Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Page 8 Red wire (+5V - Nr. 6) is equipped with female plug. It must be plugged on “+5V” marked pin of TP1 connector on instrument’s board (pic. 2.3-4). Pic. 2.3-4 Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Page 9 The tubes can be heated with a hot-flue pistol, for example (pic. 2.3-8). Be very careful so that no cables or components are damaged during this operation! Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Page 10: Interface Board Installation
(pic. 2.4-6). The connectors cannot be connected the wrong way (there are locks on them) but be careful so they would not be exchanged! Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
Page 11: Instrument Assembly
The installation of the MIDI kit is now finished and the instrument is ready for use with MIDI communication. Please read the user’s guide carefully before the MIDI interface use. Copyright © 2010 CHD Elektroservis. All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.