Packeteer PacketShaper 6500 Manual page 44

Appendix A: Safety and Regulatory Information
Electro-Magnetic Interference/Compatibility and
Safety Compliance
Overview The EMI/EMC emissions and safety compliance information for
Packeteer products is listed below.
Products
1200 AS/NZS 3548 Class A
1550 AS/NZS 4252.1
1700 ICES-003, Class A
2500 EMC Directive 89/336/EEC
3500 EMC Directive 73/23/EEC
6500 EMC Directive 93/68/EEC
7500 EN 55022:1998 Class A
9500 EN 61000-3-2:1995_A1(98)
10000
EN 61000-3-3:1995
EN 55024:1998
VCCI:2002, Class A
KN55022 Class A
KN6100-4-2,3,4,5,6,8,11
GOST-R 60950-2002
GOST-R 51318.22-99, .24-99
FCC 47 CFR part 15, subpart B,
CNS 13438 Class A
United This product has been tested and found to comply with the limits
States FCC for a Class A digital device pursuant to Part 15 of the FCC rules.
Statement These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment.
This product generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference
A-8
EMI/EMC Standards
+A2(98), & prA14(00)
Class A
Safety Standards
IEC 60950-1
EN 60950-1+A11
UL 60950-1: 03
CAN/CSA C22.2 No. 60950-
1: 03
EN 60825-1,-2 Class I Laser