Automatic Autopilot Disengage; Alarm - Rolls-Royce Helicon X3 User Manual

Operating Instructions
3.9.2

Automatic Autopilot Disengage

The function for automatic disengage of autopilot are trigged by manually operating the
lever while the autopilot mode is selected.
Exceeding an angle of +\- 20 degrees from lever zero position will cause automatic
disengage from the autopilot mode and the system will return to manual mode. This
value is not adjustable. Re-engage of autopilot mode must be manually selected from
operator.

4 Alarm

The alarm page contains a list of any active alarms in the control system. Alarms for all
the thrusters connected to the system are presented in this list. The most recent alarm
will be on top of the list.
Alarm monitoring can be set up for analogue or digital signals in the remote control.
Normally alarm monitoring is activated for all essential input signals and sensors.
Doc. No.: 13S000411
Revision: A
Copyright © 2010 Rolls-Royce plc
6
Page 13 of 22