Table of Contents Table of Contents ......................i Introduction ........................1 Safety warnings ....................... 1 Indications for use ......................3 Specifications ........................3 Operation ........................4 Troubleshooting ......................5 Positions for use ......................6...
These pulses are generated by the device and delivered through the connecting wires and electrodes to the target body areas. AP210 helps relieve pain in various parts of the body, such as the lower back, shoulders, hands and feet.
Page 4
(3) over open wounds or rashes, or over swollen, red, infected, or inflamed areas or skin eruptions (e.g., phlebitis, thrombophlebitis, varicose veins). Apply stimulation only to normal, intact, clean, healthy skin; (4) in the presence of electronic monitoring equipment (e.g., cardiac monitors, ECG alarms).
Product package should be recycled. Stacked up 4 cartons at most Indications for use To be used for temporary relief of pain associated with sore and aching muscles in the shoulder ,waist, neck, back, arm, and leg, due to strain from exercise or normal household and work activities.
Operation To operate: 1. Make sure the power switch of the device is in the OFF position. 2. Connect a pair of electrode pads to one connecting wire by snapping them on; the other end of the connecting wire is connected to the left output of the device. Similarly, the other pair of electrode pads is connected to the remaining connecting wire and the right output of the device.
7. Pressing the central "►II" button will pause the device; press again to resume. 8. Pressing the T button could select different countdown periods of time from 10 to 60 min. 9. When done, turn off the device, and put away the connecting wires and electrode pads.