Playing A Source - Pioneer VSX-C100 Operating Instructions Manual

Playing a Source

Here are the basic instructions for playing a disc or videotape (or any other source) with your home theater system.
The following pages will tell you about refinements you can make to the sound but the below procedure (with the
settings you have already made) should allow you to get enjoyable home theater.
2
RECEIVER
SIGNAL SELECT
3
DVD TV / SAT FRONT
DVR/ VCR FM / AM
AUTO
SURROUND ADVANCED
SETUP TEST TONE CH_SELECT
MUTE
MASTER
VOLUME
TOP MENU DISPLAY T.EDIT
TUNE
DTV MENU
ST
ENTER
AUDIO
TUNE
CH RETURN DTV ON /OFF
CLASS MPX
TV CONTROL
INPUT
CHANNEL CHANNEL
SELECT
RECEIVER
2
STANDBY/ON button
FRONT INPUT
PHONES
STANDBY/ON
DIGITAL IN
VIDEO L AUDIO R
3
Input buttons
AUDIO/ VIDEO MULTI-CHANNEL RECEIVER
DVD TV/SAT DVR/VCR FM/AM
SURROUND MODE
2
PHONES ADVANCED SOUND
/VIRTUAL PRO LOGIC II MODE
4
SOURCE
SLEEP
DIMMER
SOUND
MODE
ROOM
SETUP
ENTER
7
MENU
ST
SUBTITLE
GUIDE
DTV INFO
D.ACCESS
ENTER
10
VOLUME
INPUT SIGNAL SUR
2
DTS AUTO PHON
DIGITAL /VIRTU
7
MASTER VOLUME
VSX-C100
MASTER
VOLUME
FRONT
R
DOWN UP
1 Turn on the power of the playback compo-
nent (for example a DVD player), your TV
and subwoofer (if you have one).
2 Press to turn the power on.
RECEIVER
3 Select the source (like a DVD player) you
want to playback using the individual Input
buttons on the remote control.
4 Set the signal select to AUTO (if necessary).
5 Make sure the TV is set to this receiver.
If you're not sure which input on your TV this
receiver is hooked up to confirm the input jack on the
back of the TV and consult the manual that came
with your TV to figure out the proper setting.
6 Start playback of the component you selected
in step 3.
7 Press
MASTER VOLUME (+/–)
volume level.
• If you want to use analog sources choose analog with
the SIGNAL SELECT button (see page 42).
• When you're using your TV' s internal tuner the TV
shouldn't be set to this receiver (step 5 above).
• For Karaoke make sure the equipment is hooked up
with analog connections and choose analog with the
SIGNAL SELECT button (see page 42).
Basic Playback
to adjust the
27
En