Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for CATH-TECH CIC-200
- Page 1 CATH-TECH CORROSION CONTROL EQUIPMENT Operation Manual for CIC-200 GPS Synchronized Current Interrupter Controller CI-100 Cathodic Technology Ltd. 15-1 Marconi Court Bolton, Ontario Canada L7E 1E2 Ph: ++1-905-857-1050 ctl@cath-tech.com www.cath-tech.com...
-
Page 3: Table Of Contents
Rev 0 – Nov 2016 CIC-200 Manual Table of Contents Table of Contents ....................... 1 Limited Warranty ....................... 2 Safety .......................... 2 Welcome ........................3 Rating Info ......................3 Features ........................4 Installation ........................4 AC Power ....................... 5 Rectifier ........................5 GPS (Global Positioning System) ................ -
Page 4: Limited Warranty
Note: There is no warranty expressed or implied on batteries. Cath-Tech Policy Cath-Tech extends a two-year in use warranty on all units, which have been designed and/or manufactured by Cath-Tech staff. Cath-Tech reserves the right to make any changes in design or specification which it deems an improvement, with no liability to make the same changes on existing equipment. -
Page 5: Welcome
If any damage occurred during shipping, file a claim with the carrier immediately. Rating Info The CIC-200 is rated for a maximum of 200 Amps. As the voltage increases, the maximum amperage decreases as per the table below: AC Voltage... -
Page 6: Features
Rev 0 – Nov 2016 CIC-200 Manual Features Power ON/OFF External Relay GPS Antenna AC Power Mains Cable Keypad Backlit LCD Fuse drawer Interrupt 5A, 240V AC Indicator... -
Page 7: Installation
Follow the company procedures for rectifier access. The relay is installed in series with the rectifier output to the anode bed or to the structure. The CIC-200 has 2 relays that are to be wired in parallel to share the load at high amperage. -
Page 8: Setup
Rev 0 – Nov 2016 CIC-200 Manual Setup Prior to turning on the unit, it is best to attach the GPS antenna if you will be using GPS synchronization. To turn the unit on move the power toggle to the ON position then press the * key on the keypad. - Page 9 Rev 0 – Nov 2016 CIC-200 Manual If you only enter 3 digits, the program interprets that as having an extra 0 on the end. For example, entering the number 200, the program will make your off time 2000 ms. Instead, type in 0200.
-
Page 10: C-Gps-Power
Rev 0 – Nov 2016 CIC-200 Manual Press C to change the starting time and enter your new time in hours and minutes. Press N once you are satisfied to move on. Start Date The next screen asks for the starting date of the cycle. The value is entered in 4 digits representing the month and day. -
Page 11: 0-Rs232
Rev 0 – Nov 2016 CIC-200 Manual yymmddhhmmss The date and time is entered as one long numerical string with two digits for the year, month, day, hour, minute and second. Once programmed, the internal clock will keep track. After the date and time have been successfully programmed, it will be shown on the main menu. -
Page 12: Maintenance
An amber LED on the outside of the box above the power input will flash in time with the interruption cycle. Maintenance There are very few user serviceable parts on the CIC-200. If the unit does not interrupt; Ensure that AC power is provided to the unit. The screen should light up and show the Main Menu when the power switch is ON. - Page 13 Rev 0 – Nov 2016 CIC-200 Manual Wiring Diagram...
-
Page 14: Spare Parts
Rev 0 – Nov 2016 CIC-200 Manual Spare Parts Below is a list of spare or replacement parts available for the CIC-200 from Cathodic Technology. Most parts are in stock and can ship in 2 business days. CTL-230 CTL-542 Power... - Page 16 CATH-TECH CORROSION CONTROL EQUIPMENT Visit www.cath-tech.com to view our wide range of products and services. © August 2015 by Cathodic Technology Ltd, Canada.
Need help?
Do you have a question about the CIC-200 and is the answer not in the manual?
Questions and answers