Alpine X208U Installation Manual page 14

ML.book Page 12 Tuesday, November 29, 2016 10:45 AM
Connection of a DVE-5300 and a Rear Monitor with HDMI support
HDMI connection cable (included with DVE-5300)
HDMI output connector
DVE-5300 (sold separately)
Remote Control Output Lead (Brown) (For DVD Plyer
DVE-5300)
Remote Control Output Lead (Brown) (For Rear Monitor)
• Set the HDMI Setup to "DVD. " For details, refer to "HDMI Setup" in the OWNER'S MANUAL.
• If you connect an optional HDMI selector module, you can connect two HDMI devices. When you use the HDMI selector module, set the HDMI Selector
to "On. " For details, refer to "Setting the HDMI Selector On/Off " in the OWNER'S MANUAL. For details on how to connect, also refer to the OWNER'S
MANUAL of the HDMI selector module.
When connecting an HDMI connection cable, be sure to secure it using the supplied HDMI Fixation Bracket. For details on how to secure it, see "Note on
using HDMI Connection Cables" (page 4).
12
-EN
01GB04X208U-US_EN.fm
HDMI input connector*
W.REMOTE connector
REMOTE IN DVD REMOTE
(Brown)
(Brown)
REMOTE OUT DVD STATUS IN
(Brown) (Red/White)
Rear Monitor with HDMI
support
(sold separately)
HDMI input connector
HDMI connection cable
(sold separately)
HDMI output connector*
W.REMOTE cable
MON REMOTE
(Brown)
REMOTE IN
(Brown/White)
Remote Control Input Lead (Brown/White) (For Rear
Monitor)
DVD Control Input Lead (Red/White) (For DVD Player
DVE-5300)
ALPINE X208U/INE-W977HD 68-34732Z04-A (EN)
REMOTE IN
REMOTE OUT