Reference / Nobo Kapture™ guide to good capturing
•
Do not use a cartridge with a damaged nib.
•
Check the pen is awake before capturing. With the cap on, tap the pen nib on a solid surface. When the LED is
on, the pen is awake (on).
•
Hold the digital marker pen the correct way up, the LED should be facing upwards.
•
Write normally with even pressure.
•
Stay within the range of the system, which is up to 10 metres from the USB receiver.
•
Ensure there is enough battery life left for the current session. A battery status indicator can be found in the
pen management section of the software.
•
Ensure that you do not have two pads of the same pad letter in a session.
•
Check back with your computer to ensure your session is being captured correctly.
•
Additional help can be found at
•
New versions of software will periodically become available for download, the following phrase will appear
in a pop-up window to prompt installation. ' A newer version of the software is now available, please click the
following link www.noboeurope.com/Nobokapture' .
The current version of software and latest available version for download will be shown.
http://www.noboeurope.com/Nobokapture
24
Need help?
Do you have a question about the Kapture and is the answer not in the manual?