Setting Up The Main Unit; Assigning The Digital Inputs - Pioneer Elite VSX-53TX Operating Instructions Manual

Easy Setup Guide Part 1

3 Setting up the Main Unit

1 Plug the AC power cord into a wall outlet.
2 Press the  STANDBY/ON button to switch the receiver ON.

4 Assigning the Digital Inputs

This is only necessary if you did not hook up your DVD player to DIGITAL IN 3 using a coaxial cable but
rather connected it to one of the optical digital inputs. The following example shows how to assign the
DIGITAL IN 2 jack to DVD.
3
4
5
6
12
1 Turn on the receiver and your TV,
press the RECEIVER button on the
remote control.
2 Press the SYSTEM SETUP button.
The SYSTEM SETUP menu appears on your TV (if it
doesn't, refer to page 10 to make sure you have prop-
erly connected the receiver to your TV).
3 Looking at the on-screen display on
your TV, use the  buttons to
select INPUT ASSIGN. Press the
ENTER button.
4 DIGITAL IN-SELECT should be
selected, if not use the  buttons
to select it. Press the ENTER button.
5 Use the  buttons to select
DIGITAL-2 and press ENTER.
The default setting for the DIGITAL-2 jack is CD-R.
6 Use the  buttons to select DVD/
LD and press ENTER.
7 Press the SYSTEM SETUP button.
The receiver exits the setup process.