Advertisement
1
• Fit a hub to a base.
Hint: The hubs are designed to fit each base
one way. If a hub does not seem to fit, try
assembling it to the other base.
• Insert four screws into the hub and tighten.
• Repeat this procedure to assemble the other
base and hub.
2
• Place the mat, print side up, between
the bases.
• Fit all three straps on each side of the mat
into the slots in the bases. Make sure the tab
on the end of each strap forms a "T" on the
other side of the slot.
• Pull up on the mat to be sure it is assembled
to the bases.
Base
Hub
Assembly
The piano can be assembled to the hubs for
Lay & play or Sit & play modes.
Piano
3
Mat
• Fit the piano onto the peg on each hub.
• Tighten each hub to secure the piano in place.
4
Lay & play
Sit & play
Advertisement
